Installation Manual

This will bring up a new window.
By default, your PC's network adapter is set to "Obtain an IP address automatically" or allow your
router to use DHCP to assign your PC an IP address. In this instance, we want to set a static IP
address for our PC that matches the default IP scheme of the encoder (192.168.1.168). In the above
instance, I set a static IP address of ‘192.168.1.100’ to my PC and a subnet mask of ‘255.255.255.0’
(Class C).
After you have assigned your IP address and subnet mask, you may hit the 'OK' button.