User's Manual

Microphone
Speaker Charging Port
Ear plug
LED
light indicator
Power/Talk key
Volume up
Volume down
11
B headsetluetooth
Model No:BT6000
USER GUIDEUSER GUIDE
22
Weee Statement
To protect the global environment and as an environmentalist,
Bluemate must remind you that.........
Under the European union ("EU") Directive on Waste Electrical and
Electronic Equipment, Directive 2002/69/EC, which takes effect on
August 13,2005, products of "electrical and electronic equipment"
cannot be discarded as municipal waste anymore and manufacturers
of covered electronic equipment will be obligated to take back such
products at the end of their useful life. Bluemate will comply with the
products that are sold into the EU. You can return these products to
local collection points.
1. Overview
Thank you for purchasing BT6000 Bluetooth Headset. Before starting to use the product;
please ensure the content of the product package; and read the User Manual carefully, to
understand all the function of the product. BT6000 adopts the latest Bluetooth
technology to connect all the Bluetooth devices with Audio Gateway function like
mobile phone, desktop, notebook etc. Before you use the headset, please to make sure
the device you're going to use with is compatible with Bluetooth specification V2.0 and
supports Bluetooth Headset of Handsfree Profile.
- Only when the system activates the charging is allowed; the whole charging time is about
90-120 minutes.
- When first time charging the headset please charging it at least for 4 hours.
- Don't use the headset when it is recharging; the headset will switch off itself when it is
recharging.
- Please use the provided charger only.
- When the LED indicator flashes red light, it means the battery level is low and should be
recharged soon.
- Only when the temperature is within the range -10 (+14F) to +45 (+113F); the
headset can be charged.
1.Press the Power key for about 3 Sec ; after the green indicator light flashing 3 times to
activate the power.
2.When switching off the headset , press the Power Key for about 3 Sec; after the red
indicator light flashing 3 times the power will switch off.
- When switching on your headset, you will hear one " Do" sounds from it ; by the time
the green indicator light will flash 3 times then flashing 2 times . The process will repeat
5 times then it will flash once every 3 Sec, now the headset is under the " "
mode.
- While the headset is activating, it will detect the paired device automatically ( only if the
paired device is activated and within 10 meters of the headset) then turn into the
connecting mode directly. When the green indicator light flashing two times non-stop; it
means the headset is in the .
- When switching off the headset; you will hear one " Beep" sounds from the headset ,
indicator light will turn off.
( or any other Bluetooth devices).
Before using the headset for the first time; you need to pair with your Bluetooth device first.
1.Before pairing, make sure your headset is off.
2.Press the power key for at least 5 sec; when you see the blue and red indicator light
flashing alternately it means the headset is in the pairing mode.
3.Please ensure that your mobile phone is provided the Bluetooth Function, and activate the
function. Each brand of mobile phone might have different ways to operate it; please check
up with your mobile phone user's manual.
4.You will find the words string " " show on certain items in your mobile phone.
5.Choose “ ” and do the pairing.
6.Key in the pairing pin code " " then press " " , the indicator light will turn from the
green/red flashing status into green flashing, it means the pairing has been successful.
7.Now the headset has been in the "stand-by"mode, you may receive or dial the phone call.
- If the pairing can't be done within 90 Sec, the headset will be in the "stand-by" mode
automatically ( green/red flashing every 3 Sec). You will not be able to use your headset;
you will have to repeat the procedure form step 1-6 pairing again.
- When pairing; the distance between the headset and the mobile phone within 10 cm-1 meter
is preferred; and ensure there isn't any metal obstacle.
- Each Bluetooth headset has a setting pin "1234". According to each brand of mobile phone
has their own way for setting, the detail you may refer to your user's manual of the mobile
phone.
Notice
4.Power on/off
Notice:
stand-by
"connecting mode"
5.Pairing with your mobile phone
BT6000
1234 yes
Notice:
к к
3. Charging the Headset
There is a lithium polymer battery inside the headset; please fully charge the battery
before you use it.
1.Plug the portable charger to the electricity source.
2.Plug the portable charger into the Charging Port in the end part of the headset.
3.when charging, there will be the red indicator light flashing, after the battery fully
charged; the indicator light will be off.
2. Introduction of the product
FCC Safety Statements
The device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference that
may cause undesired operation.
The radiated output power is far below the FCC radio frequency exposure limits.
Nevertheless, this device should be used in such a manner that the potential for
human contact during normal operation is minimized.
MiJOYA
BT6000