User's Manual

Note: If at any time during the installation process you receive a “Driver Signature

Notice”, click “OK” to continue the installation process.

Step 1: Software Setup

8. Confirm the completion of the software installation; click “Finish” and restart the

system if prompted to do so.

Step 1: Software Setup

Hardware Setup for Windows 98 SE, Me, 2000, and XP

Follow these instructions to install your USB Adapter on your PC.

Note: Your USB Adapter is sensitive to static electricity, which can damage its delicate

electrical components. To protect your device, always touch the metal chassis of your

computer before handing the USB Adapter. This will ground any potential electrostatic

discharge. Avoid touching the metal connector when handling the USB Adapter. Dry

weather conditions or walking across carpeted floors may cause you to acquire an

electrostatic charge.

1. Connect the USB Adapter directly to an