User's Manual

ManualsBrandsJabil ManualsElectronicsServer

ATLANTA project

Atlanta13,Atlanta14,Atlanta15,Atlanta16,Atlanta17,AtlantaB1, AtlantaB2

Revision

Description

Originator

Date

Atlanta User Manual

Amanda Mora

3/3/2020

Disclaimer

Information in this document is provided in connection with Hyve Solutions (Manufactured by Jabil) products. Hyve Solutions (Manufactured

by Jabil) assumes no liability whatsoever, Hyve

Solutions

(Manufactured by Jabil)

disclaims any express or implied warranty, relating to sale

and/or use of Hyve Solutions

(Manufactured by Jabil)

products including liability or warranties relating

to fitness for a particular purpose,

merchantability, or infringement of any patent, copyright or other intellectual property right. Hyve Solutions (Manufactured by Jabil) products

are not designed, intended or authorized for use in any medical, lifesaving, or life sustaining applications or for any other application in which the

failure of the Hyve Solutions (Manufactured by Jabil) product could create a situation where personal injury or death may occur. Hyve

Solutions (Manufactured by Jabil) may make changes to specifications and product descriptions at any time, without notice.

Summary of content (21 pages)

PAGE 1
ATLANTA project Atlanta13,Atlanta14,Atlanta15,Atlanta16,Atlanta17,AtlantaB1, AtlantaB2 Revision Description Originator Date A Atlanta User Manual Amanda Mora 3/3/2020 Disclaimer Information in this document is provided in connection with Hyve Solutions (Manufactured by Jabil) products.
PAGE 2
Warnings 2
PAGE 3
PAGE 4
PAGE 5
PAGE 6
PAGE 7
PAGE 8
PAGE 9
PAGE 10
PAGE 11
PAGE 12
PAGE 13
Warnings Heed safety instructions: Before working with your server product, whether you are using this guide or any other resource as a reference, pay close attention to the safety instructions. You must adhere to the assembly instructions in this guide to ensure and maintain compliance with existing product certifications and approvals. Use only the described, regulated components specified in this guide.
PAGE 14
Regulatory Compliance FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. VCCI INDIA “Self-declaration – conforming to IS XXXXX, R XXXXX” CE Complies to EN 55032, EN 552024 and EN 60950-1.
PAGE 15
Additional Information Contact Jabil 1565 S. Sinclair Street Anaheim, CA 92806, USA https://www.jabil.com/ FCC ID: 2AVRG-ATLANTA Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 16
PAGE 17
1.0 Model Specification Table One Unit SERVER UNIT M/B CPU DIMM FAN SSD Card Card I/O Flex MP-10033750-000 Intel Xeon 8151 3.4G MAX4G, LGA-3647(3647pins) COUNT:2 MICRON MTA36ASF4G72PZ-2G6E1S1*24 Delta GF0412SS-03*10 SAMSUNG PM883 240G SSD*1 PM983 7.68T*8 Annapurna NVME Card (control SSD) K2X-AB*4 Annapurna 25G QSFP Port Network Interface Card USB LAN RF K2X-N USB 3.
PAGE 18
I/O port RJ45 port(MGMT) QSFP Port*2 RJ45 Port (Used for Setting Function) VGA PORT DC POWER INPUT 18 RJ45 Port (Used for Setting Function)
PAGE 19
Rack View When Power Shelf insert the RACK (INTO TO BUS Bar) The Bus bar will have 12VDC When server insert in the Rack Bus Bar, the one server will also get 12DV for trun on 19
PAGE 20
Built with an NFC sensor to communicate with NFC tags for server authentication NFC CABLE TO CONNECT CARD NFC MODULE AND TAG 20
PAGE 21
1.