Operation Manual
JABLOCOM User’s Guide
HB53019_ENG.doc 8 www.jablocom.com
“Rewrite target list?” message will appear. Select Copy to import the phonebook, be aware that your phone’s entire
phonebook will be rewritten. Select Back or press the
key to cancel.
b) Export to SIM: This option allows you to export your phone’s phonebook to another SIM card. Make sure the SIM
card is properly installed (see Inserting a SIM card on page 1). Select Export to SIM from the menu. A “Rewrite
target list?” message will appear. Select Copy to export your phonebook, be aware that the SIM card’s entire
phonebook will be rewritten and your phone’s entire phonebook will be copied to the SIM card. Select Back or press
the
key to cancel.
Note: making a copy of your phonebook may take a few minutes. Wait until the text: “Wait please…” disappears.
Reading an SMS Text Message
After a new text message is received, the phone will produce a message alert beep and its upper
indicator light will flash. An envelope icon will be displayed on the LCD panel with a number beside it
indicating how many unread messages were received (see the icon to the right).
To read the unread messages perform the following:
• Press the SMS hot key ( ) to automatically launch the SMS message menu. Continue pressing this hot key to cycle through
all of the messages or press the down scroll key (d) to scroll down the message list or the up scroll key (c) to scroll up the
message list. The phone can hold a maximum of 20 messages in its mailbox. It will automatically start deleting old messages,
even unread ones, after you have received more than 20 messages in your mailbox.
• To scroll through an opened text message, use the up (c) and down (d) scroll keys. The delivery time and date of each
message will be displayed at the end of each message.
Warning: If the number of messages in the call registry reaches the limit (20), the phone will begin to
automatically delete messages, beginning with messages that have already been read, the oldest one first. If
there are only unread messages in the registry, then the phone will delete them, the oldest one first. This
feature can be optionally changed to manual erasing (see Service menu – page 13).
Tip: The phone is able to display long SMS text messages; up to 4 linked SMS text messages can be
displayed.
• When you are reading the text of an incoming message, press the Options key located on the lower left side of the LCD panel
or press
3. An Options menu will launch with the following choices: Delete, Reply, Forward, Call number, Store number,
and Delete all. Scroll to the desired option and select it using the
3 key to perform the task.
• When you are reading the text of a sent message, press the Options key. An Options menu will launch with the following
choices: Send, Delete, Store number, Delete all, and Edit. Scroll to the desired option and select it using the
3 key to
perform the task.
Below is an explanation of the various text message options.
Option Description
Delete
Pressing this option deletes the message you have just read.
Reply
Pressing this option opens a text message screen that allows you to type a reply to the sender
of the message you just read. Press Send to deliver the message. You can only reply to
incoming SMS text messages.
Forward
Pressing this option opens a phone number screen that allows you to type in the phone
number of the person to whom you would like to forward the previous message. Or, from the
phone number entry screen, you can also press either the up (c) or down (d) scroll keys to
automatically open your phonebook. Select
3 when you have found the appropriate name.
Press OK to deliver the message.
Call number
Pressing this option allows you to call the sender of the last message read.
Store number
Pressing this option allows you to store the phone number (If it isn’t already stored) into your
phonebook.
Delete all
Pressing this option deletes all of the messages in the open mailbox.
Send
Pressing this option opens a phone number screen that allows you to type in the phone
number of the person to whom you would like to send the message. Refer to the Forward