GSM Desktop Phone GDP-04 User’s Guide SAFETY INSTRUCTIONS Read these guidelines. Not following them may be dangerous and/or illegal. You alone are responsible for how you use your phone and any consequences of its use. Do not switch the phone on wherever the use of a wireless phone is prohibited or when it may cause interference or danger. Small Children Do not leave your phone and its accessories within the reach of small children or allow them to play with it.
GSM Desktop Phone GDP-04 User’s Guide INDEX SAFETY INSTRUCTIONS ...................................................... 2 Call Waiting................................................................................ 8 Conference Call ......................................................................... 8 Call Transfer .............................................................................. 8 Call Register .............................................................................. 8 Mute.......
GSM Desktop Phone GDP-04 User’s Guide Connect the receiver cord Install the backup battery Connect the power adaptor – switch the phone ON The message “Phone is starting…” appears on the LCD after connecting the power adaptor. If your SIM card is protected by a PIN code, the phone will require the PIN code. Enter the PIN code and confirm by pressing the green key or OK. If you enter an incorrect PIN code three times in a row, the PIN code will be blocked.
GSM Desktop Phone GDP-04 User’s Guide YOUR PHONE Time and date New text message indicator Missed calls indicator Strength of the cellular network signal Battery charging status Name of the GSM network Selection keys – the current function is shown on the LCD Speed dial buttons CALL key CANCEL key Navigation key Opens your SMS box Redials the last dialed number Opens the call list Opens your phonebook Speakerphone Starts a new message writing Character keyboard External analog phone connector (optio
GSM Desktop Phone GDP-04 User’s Guide BASIC CALL FUNCTIONS AND PHONE BOOK Making a call Pick up the receiver, enter the phone number as on a regular fixed line phone and press the selection key below Dial on the LCD. If you wait, without pushing any button, the number will then be dialed automatically. You may also press for hands free calling.
GSM Desktop Phone GDP-04 Delete Reply Forward Call Details New...
GSM Desktop Phone GDP-04 User’s Guide ADVANCED CALL FUNCTIONS Note: Some of the advanced call functions will not work properly unless they are supported by your GSM operator. Call Waiting The call waiting function indicates an incoming call even when another call is in progress. Note: To use the call waiting function, please check that you have activated it in the GSM network setting – see chapter Settings. to answer the waiting call.
GSM Desktop Phone GDP-04 User’s Guide PHONEBOOK Every phonebook contact can include the following items: First Name and Last Name Mobile n umber Office n umber Home num ber Ring ton e (a specific ring tone can be selected for this contact) Note: Up to 32 ASCII characters can be used for a First Name or Last Name. The total length of a Name should not exceed 44 charters. Since UTF-8 coding is used for name storage, usage of NON-ASCII specific characters will shorten the maxim available length of the name.
GSM Desktop Phone GDP-04 All call s If busy If no an swer User’s Guide - all incoming calls will be diverted to the specified number If unrea chable Cancel a ll div erts - incoming calls will be diverted if you are on another call or you reject the call by - incoming calls will be diverted if you do not pick up the call after a pre-set period of time selected in the dialog box - from 5, 10, 15, 20, 25 to 30 seconds - incoming calls will be diverted if the phone is switched off or there is no GSM networ
GSM Desktop Phone GDP-04 User’s Guide You can control some specific features by entering a service code. The structure of the code is Xn, where “X” is a function code and “n” is a value set.
GSM Desktop Phone GDP-04 User’s Guide Some extended Microsoft software components are required for JabloSuite running: Microsoft Windows Installer version 3.0 Microsoft Data Access Components (MDAC) 2.8 Microsoft .NET 2.0 All the above-mentioned programs are available on the JabloSuite installation CD or can be downloaded for free from Microsoft web site before installation. Note: Be sure you have the administration rights to your computer before the start of the installation.
GSM Desktop Phone GDP-04 User’s Guide Note: These parameters may vary according to your service provider’s settings. Default settings of connection parameters are APN = “Internet”, Name = “”, Password = “”. Press Apply to save your settings and Connect to log your PC onto the internet via GPRS. Firmware update GDP-04 offers a unique opportunity of upgrading the phone firmware through the Internet from Jablocom update server.
GSM Desktop Phone GDP-04 User’s Guide TROUBLESHOOTING JabloCOM is improving the GDP-04 phone software as well as the JabloSuite call management software continuously. If you find an incorrect phone behavior, please use Update Device Firmware within the JabloSuite SW and check if you use the latest software release available (menu Tools -> Update Device Firmware). Detail instruction update instructions as well as the latest JabloSuite version you can find on our website - www.jablocom.com/support.
GSM Desktop Phone GDP-04 User’s Guide CERTIFICATION AND WARRANTY Hereby, JabloCOM s.r.o., declares that this GDP-04(A) GSM Desktop Phone is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Notified body mark for GSM module approval is CE0682. The original conformity assessment document can be found at the web site www.jablocom.com.
GSM Desktop Phone GDP-04 User’s Guide
