Operation Manual
Bezdrátové tlačítko RC-28 MFK51102 Bezdrátové tlačítko RC-28 MFK51102
Wireless push button RC-28
The RC-28 is designed to be used as a wireless door bell button. It works with the UC-260 receiver
as well as the UC-216, UC-222 and the UC-280 receivers.
Specification
Power 6 V battery (L1016 type)
Battery life time typically 1 year
Frequency 433.92 MHz
Operating environment Outdoor sheltered (use the protection roof)
Operating temperature from -20
o
C to +50
o
C
Operating humidity from 25 % to 75 %
Storage temperature from -20
o
C to +70
o
C
Can be operated according to ERC REC 70-03
Hereby, Jablotron Ltd., declares that this RC-28 is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. Original of the conformity
assessment can be found at the web page www.jablotron.cz
, section Technical support.
Installation
Note: Do not install the RC-28 on a metal surface. This could
lead to significant reduction of the working distance
• Open the name label cover (see picture).
• Unscrew the screw under the cover
• Remove the rear part of the button by pressing in
the released screw.
• Attach the rear part in the desired location together
with the protective roof.
• Install the button to the rear part.
• Write the desired name on the label and reattach its
cover
• Enroll the button to the receiver(s) – see the
receiver’s installation manual for details
• Be careful not to use too much force while handling
the transparent cover. If the cover has to be removed
it is advisable to use a tool to grab the jutting out part
of the cover and pull it up.
Battery replacement
The battery life time for the wireless button is typically one year. After this period you should replace
the battery with a new one. When a new battery is installed, press the button. The red indicator should
flash brightly if the battery is correctly connected.
The RC-28 requires no other specific maintenance. Do not use any organic solvent for cleaning.
Note: Dispose of batteries safely depending on the type of the batteries and local
regulation. Although this product does not contain any harmful materials we suggest
you to return the product to the dealer or directly to the producer after usage.
Wireless push button RC-28
The RC-28 is designed to be used as a wireless door bell button. It works with the UC-260 receiver
as well as the UC-216, UC-222 and the UC-280 receivers.
Specification
Power 6 V battery (L1016 type)
Battery life time typically 1 year
Frequency 433.92 MHz
Operating environment Outdoor sheltered (use the protection roof)
Operating temperature from -20
o
C to +50
o
C
Operating humidity from 25 % to 75 %
Storage temperature from -20
o
C to +70
o
C
Can be operated according to ERC REC 70-03
Hereby, Jablotron Ltd., declares that this RC-28 is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. Original of the conformity
assessment can be found at the web page www.jablotron.cz
, section Technical support.
Installation
Note: Do not install the RC-28 on a metal surface. This could
lead to significant reduction of the working distance
• Open the name label cover (see picture).
• Unscrew the screw under the cover
• Remove the rear part of the button by pressing in
the released screw.
• Attach the rear part in the desired location together
with the protective roof.
• Install the button to the rear part.
• Write the desired name on the label and reattach its
cover
• Enroll the button to the receiver(s) – see the
receiver’s installation manual for details
• Be careful not to use too much force while handling
the transparent cover. If the cover has to be removed
it is advisable to use a tool to grab the jutting out part
of the cover and pull it up.
Battery replacement
The battery life time for the wireless button is typically one year. After this period you should replace
the battery with a new one. When a new battery is installed, press the button. The red indicator should
flash brightly if the battery is correctly connected.
The RC-28 requires no other specific maintenance. Do not use any organic solvent for cleaning.
Note: Dispose of batteries safely depending on the type of the batteries and local
regulation. Although this product does not contain any harmful materials we suggest
you to return the product to the dealer or directly to the producer after usage.
Internet: www.jablotron.cz
Tel.: +420 483 559 999
fax: +420 483 559 993
Pod Skalkou 33
46 6 01 Jablonec nad N isou
Czech Republic
Internet: www.jablotron.cz
Tel.: +420 483 559 999
fax: +420 483 559 993
Po d Ska l ko u 3 3
46 6 01 Jablonec nad N isou
Czech Republic