Jabra Speak 750 User manual
© 2020 GN Audio A /S. All rights reserved. Jabra ® is a trademark of GN Audio A/S. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license. Designed and engineered in Denmark Made in China MODEL: PHS040Wa / END040W Declaration of Conformity can be found on www.jabra.
.1 Huddle rooms 3.2 Large meeting room ENGLISH 1. Welcome..........................................5 2. Overview..........................................6 3. Where To Position.........................7 3.3 Desk 3.4 Stereo media 4. How To Charge............................ 11 4.1 USB charging 4.2 Automatic power off 4.3 Battery status 5. How To Connect......................... 13 5.1 Connect to computer (Bluetooth adapter) 5.2 Connect to computer (USB cable) 5.3 Connect to smartphone 6. How To Use ...
7.1 Jabra Direct 7.2 Update firmware 8. Support......................................... 24 8.1 FAQ and technical specifications ENGLISH 7. Software and firmware............. 23 8.
Thank you for using the Jabra Speak 750. We hope you will enjoy it! Jabra Speak 750 features ENGLISH 1.
Mute button Bluetooth button Battery status button Volume down button ENGLISH 2.
3.1 Huddle rooms For the optimal audio quality, position the speakerphone in the center of the table, up to 2m/6.5ft from each participant. A single Jabra Speak 750 is ideal for up to 6 people. ENGLISH 3. Where to position up to 2m/6.
For large meetings of up to 12 people in a single room, position two Jabra Speak 750 devices up to 4m/13ft apart, but no closer than 0.5m/1.6ft. Positioning them at either end of the table, up to 2m/6.5ft from participants, will ensure everyone can be heard clearly. ENGLISH 3.2 Large meeting room 0.5m-4m 1.6ft-13ft To temporarily link the audio between two Jabra Speak 750 devices, tap the Link button on both speakerphones when they are within 4m/13ft.
When using the Jabra Speak 750 at your desk it is recommended to put the speakerphone into an upright position using the table stand. This will better direct the audio towards you for a richer music and media experience. Additionally, two Jabra Speak 750 devices can be linked together for stereo sound. ENGLISH 3.
If you are presenting or viewing stereo multimedia or listening to music or media at your desk, two Jabra Speak 750 devices can be positioned on either side of a projector or monitor for stereo sound. ENGLISH 3.4 Stereo media To temporarily link the audio between two Jabra Speak 750 devices, tap the Link button on both speakerphones when they are within 4m/13ft.
4.1 USB charging Plug the Jabra Speak 750 into a USB power source using the attached USB cable. The Jabra Speak 750 battery lasts for up to 10 hours of talk time and takes approx. 3 hours to fully charge. ENGLISH 4. How to charge jabra 4.2 Automatic power off To preserve battery while unplugged, the Jabra Speak 750 will automatically power off when it has not been connected to a Bluetooth device for 15 minutes.
To view the current battery status, tap the Battery status button. The LEDs around the edge of the Jabra Speak 750 will light up to indicate the current battery status. ENGLISH 4.
5.1 Connect to computer (Bluetooth adapter) ENGLISH 5. How to connect Plug the Jabra Link 370 Bluetooth adapter into a USB port on your computer. The Jabra Speak 750 and the Jabra Link 370 Bluetooth adapter are pre-paired and ready to use out of the box. The Bluetooth range is up to 30m/98ft.
Plug the Jabra Speak 750 into a USB port on your computer. You may need to set the Jabra Speak 750 as the playback and recording device in your operating system’s audio settings and in Microsoft Teams’ audio settings. ENGLISH 5.2 Connect to computer (USB cable) jabra 5.3 Connect to smartphone or tablet Hold the Bluetooth button for 2 seconds and follow the voice-guided instructions to pair to your smartphone or tablet. The Bluetooth range is up to 10m/33ft.
Mute button Bluetooth button Battery status button Volume down button ENGLISH 6. How to use Volume up button Link button Answer call button Microsoft Teams button Power on/off button End call button Microphone 6.1 Button visibility The buttons are backlit and only visible when the speakerphone is powered on. After 1 minute of inactivity the buttons will fade, and can be reactivated by tapping the area where the buttons are located.
WHAT HOW Power on or off Hold (1 sec) the Power button Answer call Tap the Answer call button End or reject call Tap the End call button Turn on/off voice guidance Hold (8 secs) the End call button Volume down/up Tap (or hold) the Volume down or Volume up button Mute/unmute microphone Tap the Mute button (only visible when on a call) Battery status Tap the Battery status button Connect Bluetooth device Tap the Bluetooth status button ENGLISH 6.
HOW Link two Jabra Speak 750 devices Tap the Link button (only visible when within 4m/13ft range of another Jabra Speak 750) Bring Microsoft Teams to foreground on computer Tap the Microsoft Teams button* (only visible when signed into Microsoft Teams) Join active Microsoft Teams meeting Tap the Microsoft Teams button* (only visible when signed into Microsoft Teams) View Microsoft Teams missed calls and voicemails Tap the Microsoft Teams button* (only visible when signed into Microsoft Teams) ENGLI
To temporarily link the audio between two Jabra Speak 750 devices, tap the Link button on both speakerphones when they are within 4m/13ft. The Link button will only be visible when two Jabra Speak 750 devices are within 4m/13ft. ENGLISH 6.4 Link button Max 4m/13ft jabra jabra To unlink the speakerphones, tap the Link button on one of the speakerphones. NOTE: Linking two Jabra 750 devices uses a Bluetooth connection. Each Speak 750 can only have two active Bluetooth connections.
The Microsoft Teams button is only visible when the Jabra Speak 750 is connected to your computer and you are signed into Microsoft Teams. The button behaves differently depending on the current status of Microsoft Teams. ENGLISH 6.
If someone has joined a scheduled Microsoft Teams meeting and it is starting, the LEDs will flash. Tap the Microsoft Teams button to join the meeting. ENGLISH Join a Microsoft Teams meeting View Microsoft Teams missed calls and voicemails If you have Microsoft Teams missed calls or voicemails, the LEDs will flash. Tap the Microsoft Teams button to view the list of missed calls and voicemails on your computer.
The voice guidance can be turned on or off by holding the End call button for 8 seconds. ENGLISH 6.6 Voice guidance jabra 6.7 Shared use If the Jabra Speak 750 is to be shared by many people using Bluetooth, it is recommended to enable Shared use, which can be configured in Jabra Direct. When Shared use is enabled, the speakerphone will not automatically connect to a previously connected Smartphone or Jabra Link 370 Bluetooth adapter.
Resetting the Jabra Speak 750 clears the list of paired Bluetooth devices and also clears all personalized settings. After a factory reset, it is necessary to re-pair the Jabra Speak 750 to your Bluetooth devices and Jabra Link 370 Bluetooth adapter. ENGLISH 6.8 Factory reset To factory reset, hold the Answer call button and the End call button for 8 seconds until ‘Factory reset’ is announced by the speakerphone.
7.1 Jabra Direct ENGLISH 7. Software and firmware Jabra Direct is computer software designed to support, manage and enable optimal functionality for Jabra devices. Download the latest free version from jabra.com/direct 7.2 Update firmware Firmware updates improve performance or add new functionality to Jabra devices. 1. Connect the Jabra Speak 750 to a computer using the USB cable or Jabra Link 370 Bluetooth adapter. 2. Use Jabra Direct to check for the latest firmware updates.
8.1 FAQ and technical specifications View the FAQ, certifications, and technical specifications at jabra.com/help/speak750 ENGLISH 8. Support 8.2 How to care for your Jabra device • The Jabra Speak 750 is for indoor use only. • Avoid storage at extreme temperatures (above 40°C/113°F or below -40°C/-40°F). • Do not expose the Jabra Speak 750 to rain or other liquids. • Do not cover the Jabra Speak 750 speaker mesh and buttons with stickers or labels.