Instruction manual
8
* Functions marked with * are dependent on your phone supporting these
features. Check your phone’s user manual for further information.
10. What the lights mean
What you see What this means about your headset
Solid light: In pairing mode – see Pairing section
Slow single ash: Connected to phone and in standby mode*
Slow double ash: Not connected to phone and in standby mode
Quick single ash: Active on call
Quick double ash: Incoming/Outgoing call
Triple ash: Battery low
* BT2010 is equipped with Jabra Discreet Light feature, meaning that
light indicator (LED) turns o after 1 min of non-activity. Headset is still
active, and light will ash again after a tap on the answer/end button
or any call activity.
11. Troubleshooting & FAQ
I hear crackling noises
• For the best audio quality, always wear your headset on the same side
of the body as your mobile phone.
I cannot hear anything in my headset
• Increase the volume on the headset.
• Ensure that the headset is paired with the phone.
• Make sure that the phone is connected to the headset – if it does not
connect either from the phone’s Bluetooth menu or by tapping the
answer/end button, follow the pairing procedure (refer to pairing
section in this user manual).
• You can determine whether your headset is connected to a device by
looking at the ashes on the headset after tapping the answer/end
button when the headset is on: single slow ashes means that the
headset is connected to a device, double slow ashes means that the
headset is currently not connected.
I have connection problems
• You may have deleted your headset pairing connection in your mobile
phone. Follow the pairing instructions; refer to this section in this user
manual.
• You can determine whether your headset is connected to a device by
looking at the ashes on the headset after tapping the answer/end
button when the headset is on: single slow ashes means that the
headset is connected to a device, double slow ashes means that the
headset is currently not connected.