User Manual

4
ENGLISH
CHARGE YOUR HEADSET
Make sure that your headset is fully charged for 2 hours before you start
using it. Use the supplied USB cable to charge from the computer. When
the light indicator (LED) has a solid LED light, your headset is charging.
When the solid LED light turns o, it is fully charged.
Please note: The lifetime of the battery will be signicantly reduced if your
device is left uncharged for a long period. We therefore recommend that
you recharge your device at least once a month.
TURNING YOUR HEADSET ON AND OFF
- Press the answer/end button until you see a burst of ashes on
the indicator light (LED) to turn on your headset.
- Long press the answer/end button until you see a burst of
ashes on the indicator light (LED) to turn the headset o.
Please note that the LED indicator light turns o after 1 minute to
save battery. Headset is still active, and light will ash again after
tap on the Answer/End button or any call activity. To check if the
headset is on, tap the answer/end button once – the LED indicator
light will ash, if the headset is on.
jabra
2 Hrs
jabra jabra
2 Sec-On
5 Sec-Off