User Manual
Table Of Contents
- 1. Welcome
- 2. Jabra Elite 75t overview
- 3. How to wear
- 4. How to charge
- 5. What the LEDs mean
- 6. How to pair
- 7. How to use
- 7.17 Reset the earbuds
- 7.16 Update firmware
- 7.15 Voice assistant
- 7.14 Voice guidance and languages
- 7.13 Multi-connect
- 7.12 Multiple call handling
- 7.11 MyControls
- 7.10 Sleep mode
- 7.9 Auto-pause music
- 7.8 Mono earbud use
- 7.7 Sidetone
- 7.6 HearThrough
- 7.5 Active Noise Cancellation (ANC)
- 7.4 ANC, HearThrough and Voice assistant controls
- 7.3 Call controls
- 7.2 Music controls
- 8. Jabra Sound+ app
- 9. Support
29
ENGLISH
7.15 Voice assistant
Right button Voice assistant
Activate
Siri, Google
Assistant
Double-press the Right
button when not on
a call
Voice assistant settings can be configured
using the Jabra Sound+ app.
7.16 Update firmware
The Jabra Elite Active 75t can be updated to
the latest firmware version using the latest
version of the Jabra Sound+ app.
If notifications are enabled in the Jabra Sound+
app, you will receive an automatic notification
when a firmware update is available.
After a firmware update, if the LED on the
charging case flashes red, this indicates that
the charging case was not updated correctly.
To complete the firmware update correctly,
connect the charging case to a power supply,
remove the earbuds from the charging case,
place the earbuds back in the charging case,and
then close the lid for 5 seconds. This will
complete the firmware update.