User Manual
Table Of Contents
- 1. Welcome
- 2. Jabra Evolve2 75 overview
- 3. How to wear
- 4. How to charge
- 5. What the LEDs mean
- 6. How to connect
- 7. How to use
- 7.1 Power on/off
- 7.2 Calls & music
- 7.3 On-head detection
- 7.4 Switching microphones
- 7.5 Voice Assistant
- 7.6 Busylights
- 7.7 Advanced Active Noise CancellationTM (ANC)
- 7.8 HearThroughTM
- 7.9 Mute/unmute using the microphone boom arm
- 7.10 Answer call using the microphone boom arm
- 7.11 Multiuse
- 7.12 Multiple call handling
- 7.13 Voice guidance
- 7.14 How to reset
- 8. Software and firmware
- 9. Support
13
ENGLISH
4.3 Power saving modes
The headset has two levels of power saving
modes: nap mode.and sleep mode.
NAP MODE
When the headset is powered on, but not being
worn, it will automatically enter nap mode to
conserve battery. To exit nap mode, simply
wear the headset.
SLEEP MODE
When the headset has been in nap mode for 8
hours it will automatically enter sleep mode to
further conserve battery. To exit sleep mode,
simply press any button.
The length of time before the headset enters
sleep mode can be adjusted using the Jabra
Sound+ app on your smartphone or Jabra
Direct on your computer.
After 24 hours of sleep mode, the headset will
power down completely. To power the headset
on, slide the On/Off switch to Off and then On.