Jabra Evolve2 75 User manual
© 2021 GN Audio A /S. All rights reserved. Jabra ® is a trademark of GN Audio A/S. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license. Made in China MODEL: HSC150W Declaration of Conformity can be found on www.jabra.
2.1 Included accessories 2.2 Optional accessories 3. How to wear....................................8 ENGLISH 1. Welcome..........................................5 2. Jabra Evolve2 75 overview..........6 3.1 Adjusting the headset 3.2 Positioning the microphone boom arm 4. How to charge............................. 10 4.1 Charge using the desk stand (optional accessory) 4.2 Charge using USB charging cable 4.3 Power saving modes 5. What the LEDs mean................ 14 6. How to connect.................
7.8 HearThroughTM 7.9 Mute/unmute using the microphone boom arm 7.10 Answer call using the microphone boom arm ENGLISH 7.7 Advanced Active Noise CancellationTM (ANC) 7.11 Multiuse 7.12 Multiple call handling 7.13 Voice guidance 7.14 How to reset 8. Software and firmware............. 34 8.1 Jabra Sound+ 8.2 Jabra Direct 8.3 Update firmware 9. Support......................................... 36 9.1 FAQ 9.
Thank you for using the Jabra Evolve2 75. We hope you will enjoy it! Jabra Evolve2 75 features • • • • • • ENGLISH 1.
Left Busylight/ Microsoft Teams status Right Volume up/ Next track ENGLISH 2. Jabra Evolve2 75 overview Busylight/ Microsoft Teams status Answer or end call/ Open Microsoft Teams notification* HearThrough/ANC Off (hold) Charging pins for c harging stand (optional) USB-C charge port Status LED Power on or off/Pairing Play/pause music Volume down/ Restart or prev.
2.1 Included accessories ENGLISH USB-A version USB-A to USB-C cable Jabra Link 380 USB-A Bluetooth adapter USB-C version Jabra Link 380 USB-C Bluetooth adapter USB-C to USB-C cable Carry pouch 2.
3.1 Adjusting the headset Adjust the headband so that the headset fits your head comfortably. ENGLISH 3.
Pull the microphone boom arm down or up in one smooth motion. ENGLISH 3.2 Positioning the microphone boom arm When using the microphone, the tip of the boom arm should be positioned close to your mouth.
The headset can be charged using the optional desk stand, or via a USB charging cable plugged directly into the headset. ENGLISH 4. How to charge It takes approx. 2 hours and 40 minutes to fully charge the battery. The headset battery life is up to 36 hours. If the headset is out of battery, it can be charged for 15 minutes to get 6 hours of battery life.
Connect the desk stand to a powered USB port on your computer using the supplied USB charging cable, and then dock the headset on the desk stand. The desk stand is used for charging only. ENGLISH 4.1 Charge using the desk stand (optional accessory) Powered USB port The Busylight and Status LED on the headset will flash briefly to indicate the headset has been correctly docked with the desk stand.
Plug the USB charging cable into the USB-C charging port on the left earcup and any available USB port on your computer. It is recommended to charge the headset using the supplied Jabra charging cable, however it is possible to use a compatible charger. ENGLISH 4.
The headset has two levels of power saving modes: nap mode.and sleep mode. NAP MODE ENGLISH 4.3 Power saving modes When the headset is powered on, but not being worn, it will automatically enter nap mode to conserve battery. To exit nap mode, simply wear the headset. SLEEP MODE When the headset has been in nap mode for 8 hours it will automatically enter sleep mode to further conserve battery. To exit sleep mode, simply press any button.
Busylight LED Busylight LED BUSYLIGHT/MICROSOFT* LED Busylight Incoming call ENGLISH 5. What the LEDs mean (slow flash) Headset is trying to connect to Microsoft Teams.
6.1 Connect to computer Plug the supplied Jabra Link 380 into a USB port on your computer. The Jabra Evolve2 75 and the Jabra Link 380 are pre-paired and ready for use out of the box. The Bluetooth range is up to 30 meters or 100 feet. ENGLISH 6. How to connect To hear audio in the headset you may need to select the Jabra Link 380 as the playback device in your operating system’s audio settings. To manually pair the Jabra Evolve2 75 with the Jabra Link 380, download and use Jabra Direct.
1. Slide the On/Off switch to the Bluetooth position and hold it there until the LED flashes blue and you hear an announcement in the headset. ENGLISH 6.2 Pair with a smartphone Left earcup 2. Go to the Bluetooth menu on your smartphone and select the Jabra Evolve2 75 from the list of available devices. When pairing to an Android device with Google Fast Pair enabled, simply put the headset into pairing mode and you will be prompted on your nearby Android device if you wish to pair the headset.
Left Right Volume up/ Next track ENGLISH 7. How to use Answer or end call/ Open Microsoft Teams notification* HearThrough/ANC Off (hold) Power on or off/Pairing Play/pause music Volume down/ Restart or prev. track *requires Microsoft Teams headset variant Mute or unmute microphone/ Activate Voice Assistant 7.1 Power on/off Slide the On/Off switch to the On or Off position to power the headset on or off.
Right earcup ENGLISH 7.2 Calls & music Calls & music Play/pause music Press the Play/Pause button Press the Answer/End call button Answer call Alternatively, move the microphone boom arm down to answer an incoming call. See section 7.
Next track Press and hold (1 sec) the Volume up button Restart track ENGLISH Adjust volume Press the Volume up or Volume down button, when listening to music or on a call Press and hold (1 sec) the Volume down button to restart the current track Press and hold twice to play the previous track Turn Busylight on/off Press the Volume up and Volume down buttons at the same time.
Press the Voice button, when not on a call ENGLISH Activate Voice Assistant (i.e. Siri, Google Assistant, Amazon Alexa) Press the Voice button, when on a call Mute/unmute microphone Alternatively, move the microphone boom arm up to mute, or down to unmute. See section 7.
Sound modes Cycle between ANC and HearThrough Press the Sound modes button Turn off Sound modes Press and hold (1 sec) the Sound modes button ENGLISH Left earcup 7.3 On-head detection The headset has built-in sensors that can detect when the headset is being worn and will perform different actions depending on whether the headset is being worn or not.
ENGLISH AUTO-PAUSE MUSIC When listening to music, taking off the headset will automatically pause the music. Wear the headset again to automatically resume the music. MUTE CALL When you are on a call, taking off the headset will automatically mute the call. Wear the headset again to automatically unmute the call. BUSYLIGHTS The Busylight LEDs will only light up red when the headset is being worn.
To use the earcup microphones instead of the boom arm microphone, raise the boom arm and then press the Voice button. 1 ENGLISH 7.4 Switching microphones 2 Voice button To use the boom arm microphone instead of the earcup microphones, lower the boom arm all the way down. The microphone performance is best when using the boom arm microphone. For Microsoft Teams headset variants, this functionality needs to be enabled using the Jabra Sound+ app or Jabra Direct on your computer.
The Jabra Evolve2 75 enables you to speak to Siri, Google Assistant or Amazon Alexa on your smartphone using the Voice button. Right earcup ENGLISH 7.
The Busylights on the headset automatically light up red when you are on a call to indicate to colleagues that you are busy. To manually switch the Busylights on/off, press the Volume up and Volume down buttons at the same time. Right earcup ENGLISH 7.6 Busylights Busylight Turn Busylight on/off Press the Volume up and Volume down buttons at the same time.
Advanced Active Noise Cancellation (ANC) counters noise by detecting and analyzing the pattern of incoming sound, and then generating an anti-noise signal to cancel noise out. As a result, you experience a reduced level of surrounding noise during music and calls. Left earcup ENGLISH 7.
HearThrough utilizes the built-in microphones to enable you to pay attention to your surroundings and engage in conversation without needing to remove the headset. ENGLISH 7.8 HearThroughTM HearThrough settings can be configured using the Jabra Sound+ app on your smartphone or Jabra Direct on your computer.
The headset microphone can be muted by moving the microphone boom arm up, or unmuted by moving it down. ENGLISH 7.9 Mute/unmute using the microphone boom arm Mute microphone zone Unmute microphone zone This feature is on by default, and can be disabled using Jabra Sound+ on your smartphone or Jabra Direct on your computer.
An incoming call can be answered by moving the microphone boom arm down. ENGLISH 7.10 Answer call using the microphone boom arm Answer call zone This feature is on by default, and can be disabled using Jabra Sound+ on your smartphone or Jabra Direct on your computer.
The headset can pair with up to eight Bluetooth devices and connect to two Bluetooth devices at once (e.g. the Jabra Link 380 and a Smartphone, or two Bluetooth devices). The headset can accept multiple incoming calls from either device. ENGLISH 7.11 Multiuse To pair to two Bluetooth devices, use the normal pairing process separately for each Bluetooth device (refer to section 6.2). Note: Voice assistant will be activated on the last connected Bluetooth device.
The headset can accept and handle multiple calls at the same time. Right earcup Multiple call handling End current call and answer incoming call Press the Answer/ End call button Put current call on hold and answer incoming call Hold (2 secs) the Answer/End call button* Switch between held call and active call Hold (2 secs) the Answer/End call button* Reject incoming call, when on a call Double-press the Answer/End call button ENGLISH 7.
Voice guidance are announcements that will guide you through setup, or will give you headphone status updates (e.g. connection and battery status). ENGLISH 7.13 Voice guidance Voice guidance is enabled by default.
Resetting the headset clears the list of paired devices and resets all settings. Right earcup Reset headset 3 Reset pairing list and settings ENGLISH 7.14 How to reset Ensure the headset is powered on and you are not on a call.
8.1 Jabra Sound+ ENGLISH 8.
Jabra Direct is computer software designed to support, manage and enable optimal functionality for Jabra devices. ENGLISH 8.2 Jabra Direct Download the latest free version from jabra.com/direct 8.3 Update firmware Firmware updates improve performance or add new functionality to Jabra devices. The headset firmware can be updated using either Jabra Direct on your computer or the Jabra Sound+ app on your smartphone. Both applications will notify you when a firmware update is available.
9.1 FAQ View the FAQs on Jabra.com/help/evolve2-75 ENGLISH 9. Support 9.2 How to care for your headset • Always store the headset in the supplied case. • To prevent the depletion of the battery lifetime or capacity, avoid storing the headset in hot or cold environments, such as a closed car in summer, or in winter conditions. • When exposed to rain, allow the headset sufficient time to dry. It may take up to one hour for the headset to dry thoroughly and power on.
REV. A jabra.