User Manual
Table Of Contents
- 1. Welcome
- 2. Jabra Evolve2 75 overview
- 3. How to wear
- 4. How to charge
- 5. What the LEDs mean
- 6. How to connect
- 7. How to use
- 7.1 Power on/off
- 7.2 Calls & music
- 7.3 On-head detection
- 7.4 Switching microphones
- 7.5 Voice Assistant
- 7.6 Busylights
- 7.7 Advanced Active Noise CancellationTM (ANC)
- 7.8 HearThroughTM
- 7.9 Mute/unmute using the microphone boom arm
- 7.10 Answer call using the microphone boom arm
- 7.11 Multiuse
- 7.12 Multiple call handling
- 7.13 Voice guidance
- 7.14 How to reset
- 8. Software and firmware
- 9. Support
11
ENGLISH
4.1 Charge using the desk stand
(optional accessory)
Connect the desk stand to a powered USB port
on your computer using the supplied USB
charging cable, and then dock the headset on
the desk stand. The desk stand is used for
charging only.
Powered USB port
The Busylight and Status LED on the headset
will flash briefly to indicate the headset has
been correctly docked with the desk stand.
The battery LED will then briefly flash green,
yellow or red to indicate the current battery
charging status. When the LED turns solid
green, the headset is fully charged.