User's Manual
Table Of Contents
- 1. Welcome
- 2. Jabra Evolve2 85 overview
- 3. How to wear
- 4. How to charge
- 5. What the LEDs mean
- 6. How to connect
- 7. How to use
- 7.1 Power on/off
- 7.2 Calls & music
- 7.3 On-ear detection
- 7.4 Switching microphones
- 7.5 Voice Assistant
- 7.6 Busylights
- 7.7 Active Noise Cancellation (ANC)
- 7.8 HearThroughTM
- 7.9 Mute/unmute using the microphone boom arm
- 7.10 Answer call using the microphone boom arm
- 7.11 Multiuse
- 7.12 Multiple call handling
- 7.13 Voice guidance
- 7.14 How to reset
- 8. Software and firmware
- 9. Support
18
ENGLISH
6.3 Connect to 3.5mm jack port
Plug the supplied audio jack cable into the
3.5mm audio jack port on the headset.
When connected to a device using the audio
jack cable, the headset microphone and
Bluetooth are disabled. If the headset is
plugged into a smartphone, the smartphone’s
microphone will be used for calls.
The volume and ANC/HearThrough can be
controlled using the buttons on the headset.