User's Manual
Table Of Contents
- 1. Welcome
- 2. Jabra Evolve2 85 overview
- 3. How to wear
- 4. How to charge
- 5. What the LEDs mean
- 6. How to connect
- 7. How to use
- 7.1 Power on/off
- 7.2 Calls & music
- 7.3 On-ear detection
- 7.4 Switching microphones
- 7.5 Voice Assistant
- 7.6 Busylights
- 7.7 Active Noise Cancellation (ANC)
- 7.8 HearThroughTM
- 7.9 Mute/unmute using the microphone boom arm
- 7.10 Answer call using the microphone boom arm
- 7.11 Multiuse
- 7.12 Multiple call handling
- 7.13 Voice guidance
- 7.14 How to reset
- 8. Software and firmware
- 9. Support
35
ENGLISH
7.14 How to reset
Resetting the headset clears the list of paired
devices and resets all settings.
Right
earcup
Reset headset
3
Reset pairing
list and settings
Ensure the headset
is powered on and
you are not on a
call. Then press
and hold (3 sec)
the Multi-function
button and the
Volume up button
simultaneously until
the LED lights up
purple and your hear
an announcement in
the headset
You will need to
re-pair the headset
to the Jabra Link 380
using Jabra Direct, or
to your Smartphone
(see section 6.2)