EVOLVE2 85 User manual
© 2020 GN Audio A /S. All rights reserved. Jabra ® is a trademark of GN Audio A/S. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license. Made in China MODEL: HSC120W Declaration of Conformity can be found on www.jabra.
2.1 INCLUDED ACCESSORIES 2.2 OPTIONAL ACCESSORIES ENGLISH 1. Welcome..........................................5 2. JABRA EVOLVE2 85 OVERVIEW......................................6 3. HOW TO WEAR.............................8 3.1 ADJUSTING THE HEADSET 3.2 POSITIONING THE MICROPHONE BOOM ARM 3.3 FOLD FLAT FOR STORAGE 4. HOW TO CHARGE..................... 11 4.1 CHARGE USING THE CHARGING STAND (OPTIONAL ACCESSORY) 4.2 CHARGE USING USB CHARGING CABLE 4.3 SLEEP MODE 5. WHAT THE LEDS MEAN........... 15 6.
7.5 VOICE ASSISTANT 7.6 BUSYLIGHTS 7.7 ACTIVE NOISE CANCELLATION (ANC) 7.8 HEARTHROUGHTM ENGLISH 7.4 SWITCHING MICROPHONES 7.9 MUTE/UNMUTE USING THE MICROPHONE BOOM ARM 7.10 ANSWER CALL USING THE MICROPHONE BOOM ARM 7.11 MULTIUSE 7.12 MULTIPLE CALL HANDLING 7.13 VOICE GUIDANCE 7.14 HOW TO RESET 8. SOFTWARE AND FIRMWARE................................... 36 8.1 JABRA SOUND+ 8.2 JABRA DIRECT 8.3 UPDATE FIRMWARE 9. SUPPORT..................................... 38 9.1 FAQ 9.
Thank you for using the Jabra Evolve2 85. We hope you will enjoy it! Jabra Evolve2 85 features ENGLISH 1.
Left Right Volume up/ Next track (hold 1 sec) ANC/HearThrough Busylight/ Microsoft* LED ENGLISH 2. Jabra Evolve2 85 overview Busylight/ Microsoft* LED Play or Pause music Answer or end call/ Open Microsoft Teams notification* Charging pins for charging stand (optional accessory) 3.
Jabra Link 380 USB-A Bluetooth adapter Carry case Flight adapter Jabra Link 380 USB-C Bluetooth adapter ENGLISH 2.1 Included accessories USB-A to USB-C cable 3.5mm jack cable 2.
3.1 Adjusting the headset Adjust the headband so that the headset fits your head comfortably. ENGLISH 3.
Rotate the microphone boom arm down or up in one smooth motion. ENGLISH 3.2 Positioning the microphone boom arm When using the microphone, the tip of the boom arm should be positioned close to your mouth.
The earcups can be folded flat for easy storage inside the carry case. ENGLISH 3.
The headset can be charged using the optional charging stand, or via a USB charging cable plugged directly into the headset. ENGLISH 4. How to charge It takes approx. 2 hours and 20 minutes to fully charge the battery. The headset battery life is up to 37 hours. If the headset is out of battery, they can be charged for 15 minutes to get 8 hours of battery life.
Connect the charging stand to a powered USB port on your computer using the supplied USB charging cable, and then dock the headset on the charging stand. ENGLISH 4.1 Charge using the charging stand (optional accessory) Powered USB port The status LED on the headset will flash white briefly to indicate the headset has been correctly docked with the charging stand. The battery LED will then briefly flash green, yellow or red to indicate the current battery charging status.
Plug the USB charging cable into the USB-C charging port on the left earcup and any available USB port on your computer. It is recommended to charge the headset using the supplied Jabra charging cable, however it is possible to use a compatible charger. ENGLISH 4.
When the headset is powered on, but not being worn, they will automatically enter sleep mode after 8 hours to conserve battery. To exit sleep mode, simply press any button. ENGLISH 4.3 Sleep mode The length of time before the headset enters sleep mode can be adjusted using the Jabra Sound+ app on your smartphone or Jabra Direct on your computer. After 24 hours of sleep mode, the headset will power down completely. To power the headset on, slide the On/Off switch to Off and then On.
ENGLISH 5. What the LEDs mean BUSYLIGHT/MICROSOFT* LED Busylight Incoming call (slow flash) Headset is trying to connect to Microsoft Teams.
6.1 Connect to computer Plug the supplied Jabra Link 380 into a USB port on your computer. The Jabra Evolve2 85 and the Jabra Link 380 are pre-paired and ready for use out of the box. The Bluetooth range is up to 30 meters or 100 feet. ENGLISH 6. How to connect To hear audio in the headset you may need to select the Jabra Link 380 as the playback device in your operating system’s audio settings. To manually pair the Jabra Evolve2 85 with the Jabra Link 380, download and use Jabra Direct.
1. Slide the On/Off switch to the Bluetooth position and hold it there until the LED flashes blue and you hear an announcement in the headset. ENGLISH 6.2 Pair with a smartphone Left earcup 2. Go to the Bluetooth menu on your smartphone and select the Jabra Evolve2 85 from the list of available devices.
Plug the supplied audio jack cable into the 3.5mm audio jack port on the headset. ENGLISH 6.3 Connect to 3.5mm jack port When connected to a device using the audio jack cable, the headset microphone and Bluetooth are disabled. If the headset is plugged into a smartphone, the smartphone’s microphone will be used for calls. The volume and ANC/HearThrough can be controlled using the buttons on the headset.
Left Sound Modes button Right Volume up button ENGLISH 7. How to use Play/Pause button Answer/End call button Microsoft Teams button* Volume down button On/Off switch Voice button 7.1 Power on/off Slide the On/Off switch to the On or Off position to power the headset on or off.
Right earcup ENGLISH 7.2 Calls & music Calls & music Play/pause music Press the Play/Pause button Press the Answer/End call button Answer call Alternatively, move the microphone boom arm down to answer an incoming call. See section 7.
Press the Microsoft Teams button* (when signed into Microsoft Teams) Join active Microsoft Teams meeting Press the Microsoft Teams button* (when signed into Microsoft Teams) View Microsoft Teams missed calls and voicemails Press the Microsoft Teams button* (when signed into Microsoft Teams) Adjust volume Press the Volume up or Volume down button, when listening to music or on a call Next track Press and hold (1 sec) the Volume up button Restart track ENGLISH Bring Microsoft Teams to foreground on
Press the Voice button, when not on a call Press the Voice button, when on a call Mute/unmute microphone Left earcup ENGLISH Activate Voice Assistant (i.e. Siri, Google Assistant) Alternatively, move the microphone boom arm up to mute, or down to unmute. See section 7.
The headset has built-in sensors that can detect when the headset is being worn and will perform different actions depending on if the headset is being worn or not. ENGLISH 7.3 On-ear detection AUTO-PAUSE MUSIC When listening to music, taking off the headset will automatically pause the music. Wear the headset again to automatically resume the music. MUTE CALL When you are on a call, taking off the headset will automatically mute the call. Wear the headset again to automatically unmute the call.
MICROSOFT TEAMS STATUS* The Microsoft Teams status LED will only indicate Microsoft notifications when the headset is not being worn. ENGLISH BUSYLIGHTS The Busylight LEDs will only light up red when the headset is being worn. Head detection and each individual action can be configured using the Jabra Sound+ app on your smartphone or Jabra Direct on your computer.
To use the earcup microphones instead of the boom arm microphone, raise the boom arm and then press the Voice button on the boom arm. 1 ENGLISH 7.4 Switching microphones 2 Voice button Earcup microphone To use the boom arm microphone instead of the earcup microphones, lower the boom arm.
The Jabra Evolve2 85 enables you to speak to Siri, Google Assistant on your smartphone using the Voice button. Right earcup ENGLISH 7.5 Voice Assistant Voice Assistant Activate Voice Assistant (i.e.
The Busylights on the headset automatically light up red when you are on a call to indicate to colleagues that you are busy. To manually switch the Busylights on/off, press the Volume up and Volume down buttons at the same time. ENGLISH 7.6 Busylights Please note that the Busylights will only light up when you are wearing the headset. Busylight settings can be configured using the Jabra Sound+ app on your smartphone or Jabra Direct on your computer.
Active Noise Cancellation (ANC) counters noise. It detects and analyzes the pattern of incoming sound, and then generates an antinoise signal to cancel it out. As a result, you experience a drastically reduced level of surrounding noise. ENGLISH 7.7 Active Noise Cancellation (ANC) ANC settings can be configured using the Jabra Sound+ app on your smartphone or Jabra Direct on your computer.
HearThrough utilizes the built-in microphones to enable you to pay attention to your surroundings and engage in conversation without needing to remove the headset. ENGLISH 7.8 HearThroughTM HearThrough settings can be configured using the Jabra Sound+ app on your smartphone or Jabra Direct on your computer.
The headset microphone can be muted by moving the microphone boom arm up, or unmuted by moving it down. ENGLISH 7.9 Mute/unmute using the microphone boom arm Mute microphone zone Unmute microphone zone This feature is on by default, and can be disabled using Jabra Sound+ on your smartphone or Jabra Direct on your computer.
An incoming call can be answered by moving the microphone boom arm down. ENGLISH 7.10 Answer call using the microphone boom arm Answer call zone This feature is on by default, and can be disabled using Jabra Sound+ on your smartphone or Jabra Direct on your computer.
The headset can be paired to up to eight Bluetooth devices and connected to two Bluetooth devices at once (e.g. the Jabra Link 380 and a Smartphone, or two Bluetooth devices). The headset can accept multiple incoming calls from either device. ENGLISH 7.11 Multiuse To pair to two Bluetooth devices, use the normal pairing process separately for each Bluetooth device (refer to section 6.2). Note: Voice assistant will be activated on the last connected Bluetooth device.
The headset can accept and handle multiple calls at the same time. Right earcup Multiple call handling End current call and answer incoming call Press the Answer/ End call button Put current call on hold and answer incoming call Hold (2 secs) the Answer/End call button* Switch between held call and active call Hold (2 secs) the Answer/End call button* Reject incoming call, when on a call Double-press the Answer/End call button ENGLISH 7.
Voice guidance are announcements that will guide you through set up, or will give you headphone status updates (e.g. connection and battery status). ENGLISH 7.13 Voice guidance Voice guidance is enabled by default.
Resetting the headset clears the list of paired devices and resets all settings. Right earcup Reset headset 3 Reset pairing list and settings ENGLISH 7.14 How to reset Ensure the headset is powered on and you are not on a call.
8.1 Jabra Sound+ ENGLISH 8.
Jabra Direct is computer software designed to support, manage and enable optimal functionality for Jabra devices. ENGLISH 8.2 Jabra Direct Download the latest free version from jabra.com/direct 8.3 Update firmware Firmware updates improve performance or add new functionality to Jabra devices. The headset firmware can be updated using either Jabra Direct on your computer or the Jabra Sound+ app on your smartphone. Both applications will notify you when a firmware update is available.
9.1 FAQ View the FAQs on Jabra.com/help/evolve2-85 ENGLISH 9. Support 9.2 How to care for your headset • Always store the headset in the supplied case. • To prevent the depletion of the battery lifetime or capacity, avoid storing the headset in hot or cold environments, such as a closed car in summer, or in winter conditions. • When exposed to rain, allow the headset sufficient time to dry. It may take up to one hour for the headset to dry thoroughly and power on.
REV. C jabra.
