Copier User Manual

Setting the fax quality
The fax quality setting defines the resolution that the MFP uses to send the fax. The following are the
available quality settings:
●
Standard: 200 x 100 dots per inch (dpi)
●
Fine: 200 x 200 dpi
●
Superfine: 300 x 300 dpi
To set the fax quality, use the following steps:
1. On the Setup tab, click Edit Defaults.
2. Under Fax Quality in the Default Settings dialog box, select the default quality for sending faxes.
3. Click OK.
NOTE: To set all of the default information at the same time, select the sender information,
notification, cover page, and preview settings and then click OK.
60 Chapter 3 Configuration ENWW