Jabra Evolve 75e User manual
© 2017 GN Audio A /S. All rights reserved. Jabra ® is a trademark of GN Audio A/S. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license. Made in China MODEL: HSC070W/END040W Declaration of Conformity can be found on www.jabra.
2.1 Included accessories 3. How to wear....................................7 ENGLISH 1. Welcome..........................................5 2. Jabra Evolve 75e overview..........6 3.1 Getting the correct fit 3.2 Attaching the EarWings 3.3 Using the magnetic earbuds 4. How to charge............................. 11 4.1 What the LEDs mean 5. How to connect........................... 13 5.1 Headset on/off 5.2 Connecting to a computer (Bluetooth adapter) 5.3 Connecting to a computer (USB cable) 5.
6.9 How to reset 7. Support......................................... 27 7.1 FAQ 7.2 How to care for your headset Jabra Evolve 75e ENGLISH 6.
Thank you for using the Jabra Evolve 75e. We hope you will enjoy it! Jabra Evolve 75e features ENGLISH 1.
ENGLISH 2. Jabra Evolve 75e overview Vibrating neckband USB charging port Magnetic zone Volume up button Busylight Battery LED ANC/Listen-in LED Multi-function button ANC/Listen-in button Volume down button Mute/Voice button Microphone 2.
Jabra Evolve 75e is designed to be worn around the neck. For the optimal call experience, position the microphone as close to your mouth as possible. Jabra Evolve 75e ENGLISH 3.
The headset is supplied with three EarGel and EarWing sizes: large, medium and small. L R L R Small Medium Large L R ENGLISH 3.1 Getting the correct fit Small Medium Large It is highly recommended to mix and match the different EarGel and EarWing sizes to find the best combination for your ear. The correct fit will feel tight and will seal out background noises.
To properly attach the EarWing, align the indent on the EarWing (as illustrated) with the ridge on the earbud, and stretch the EarWing over the earbud. It will fit perfectly in the groove when properly attached. Jabra Evolve 75e ENGLISH 3.
The earbuds are magnetic, and connect together for convenient cable and power management. When the earbuds are connected, your music will be paused or your call will be ended. Go to section 6.1. for more information. Jabra Evolve 75e ENGLISH 3.
To charge the headset, connect a USB charging cable to the USB charging port on the neckband. It is recommended to charge the headset using the supplied Jabra charging cable, however it is possible to charge the headset using your smartphone charger. ENGLISH 4. How to charge It takes approx. 2 hours to fully charge the headset. Note: Always clean and dry the USB charging port before charging the headset. It is recommended to recharge the headset at least once a month.
ENGLISH 4.
5.1 Headset on/off On: Hold the Multi-function button for 1 second. The LED will flash green, and the neckband will vibrate. ENGLISH 5. How to connect Off: Hold the Multi-function button for 3 seconds. The LED will flash red, and the neckband will vibrate.
ja br a 1. Insert the Bluetooth adapter (Jabra Link 370) into your computer. ENGLISH 5.2 Connecting to a computer (Bluetooth adapter) ja br a 2. Hold (1 sec) the Multi-function button on the headset to power it on. The headset and the Bluetooth adapter are pre-paired and will automatically connect.
1. Ensure the headset is powered on. 2. Plug the headset into a USB port on your computer using the supplied USB cable. ENGLISH 5.3 Connecting to a computer (USB cable) 5.4 Pairing with a smartphone 1. Ensure the headset is powered off, and then hold (3 secs) the Multi-function button until the LED flashes blue and you hear an announcement in the headset. 3 sec 2. Wear the headset and follow the voice-guided pairing instructions.
Magnetic zone Volume up button ENGLISH 6. How to use Busylight ANC/Listen-in LED Multi-function button ANC/Listen-in button Volume down button Mute/Voice button 6.
Detach/attach the Magnetic earbuds Adjust volume Press the Volume up or Volume down button, when listening to music or on a call Skip track forward Hold (1 sec) the Volume up button (smartphone only) Skip track backwards Hold (1 sec) the Volume down button (smartphone only) Battery status Press the Volume up or Volume down button, when not listening to music or on a call Busylight on/ off Press both the Volume up and Volume down buttons simultaneously Siri or Google Now Press the Mute/Voice butt
The headset uses Active Noise Cancellation (ANC) to eliminate outside disturbance, allowing you to fully focus. ENGLISH 6.2 Active Noise Cancellation (ANC) Press the ANC/Listen-in button to turn ANC on or off.
Listen-in enables you to hear your surroundings or engage in conversations without needing to remove the headset. ENGLISH 6.3 Listen-in Hold (2 secs) the ANC/Listen-in button to turn Listen-in on or off.
Headset voice guidance are announcements intended to guide you or give headset status updates (e.g. connection and battery status). ENGLISH 6.4 Headset voice guidance How to turn voice guidance On/Off Voice guidance is enabled by default. Voice Guidance On: Ensure the headset is powered on, and then hold the Mute/Voice button for 5 seconds. Voice Guidance Off: Ensure the headset is powered on, and then hold the Mute/Voice button for 5 seconds.
Phone voice commands enable you to speak to Siri or Google Now on your smartphone using your headset. For more information on using Siri or Google Now, please refer to your smartphone’s user manual. ENGLISH 6.
The headset can answer or reject calls when you are already on a call. Multiple call handling End current call and answer incoming call Press the Multi-function button Put current call on hold and answer incoming call Hold (1 secs) the Multi-function button Switch between held call and active call Hold (1 secs) the Multi-function button Reject incoming call, when on a call Double-tap the Multi-function button Jabra Evolve 75e ENGLISH 6.
The Busylight on the headset lets others know when you are busy, or on a call. ENGLISH 6.7 Busylight Busylight Busylight on/ off Press both the Volume up and Volume down buttons simultaneously to turn the Busylight on/off To disable (or re-enable) the Busylight function, hold both the Volume up and Volume down buttons simultaneously for 3 seconds.
The headset will vibrate whenever it is powered on/off, connected to your smartphone or computer, or when there is an incoming call. Jabra Evolve 75e ENGLISH 6.
Resetting the headset clears the list of paired devices and all headset settings. After resetting, it is necessary to re-pair the headset to your smartphone or to your Bluetooth adapter (Jabra Link 370). Please note that Jabra Direct is required to re-pair the headset to the Bluetooth adapter. ENGLISH 6.9 How to reset Reset 5 Reset the pairing list Ensure the headset is powered on and you are not on a call. Then simultaneously hold the Volume up button and the Multi-function button for 5 seconds.
Firmware updates improve performance, or add new functionality to Jabra devices. 1. Connect the Jabra Evolve 75e to a computer using the USB cable or Jabra Link 370. 2. Install Jabra Direct on your computer, or Suite for Mac on your Mac. 3. Use Jabra Direct or Suite for Mac to check for the latest firmware updates. Jabra Evolve 75e ENGLISH 6.
7.1 FAQ View the FAQs on Jabra.com/Evolve75e ENGLISH 7. Support 7.2 How to care for your headset • Always store the headset with the power off and safely protected. • Avoid storage at extreme temperatures (above 50°C/122°F or below -10°C/14°F). This can shorten battery life and may affect the earbuds. • Regularly clean the metal mesh on each earbud to avoid them becoming blocked.
ENGLISH REV B jabra.