Jabra Speak 510 User manual
© 2015 GN Audio A/S . All rights reserved. Jabra ® is a registered trademark of GN Audio A/S. All other trademarks included herein are the property of their respective owners. The Bluetooth ® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license. Made in China MODEL: PHS002W Declaration of Conformity can be found on www.jabra.
2.1 Turn on the jabra speak 510 2.2 Charging the Jabra Speak 510 ENGLISH Contents 1. Welcome............................................4 2. Speaker overview.............................5 3. Connecting........................................ 7 3.1 Connect to Jabra Link 370 3.2 Connect to mobile device (Bluetooth) 3.3 Connect to Bluetooth headset 10 4. How to use the Jabra Speak 510.11 4.1 Multiple call handling 4.2 Switch between bluetooth devices 4.3 Voice guidance on/off 4.4 Smart button 5. Software.
Thank you for purchasing the Jabra Speak 510. We hope you will enjoy it! JABRA SPEAK 510 FEATURES ENGLISH 1. Welcome Answer, end, reject and mute calls. Connect to computer via USB or Jabra Link 370. Connect wirelessly to mobile device via Bluetooth. Portable design. Omni-directional microphone. Wideband audio for exceptional sound quality. LED, audio indicators and voice guidance. Up to 15 hours talk time.
Mute microphone ENGLISH 2. Speaker overview Bluetooth Battery level Volume down Volume up Answer call End/reject call On/Off Smart button* Supplied with Jabra Speak 510+ only Jabra Link 370 *Newer Speak 510 variants (with the Smart button) have a Ver. ID beginning with D, or later. Older Speak 510 variants (without the Smart button) have a Ver. ID beginning with A, B, or C. Newer Speak 510+ variants (with the Smart button) have a Ver. ID beginning with F, or later.
Plug the Jabra Speak 510 USB cable into any available USB port on your computer, or Press and hold (2 secs) the On/Off button to turn the Jabra Speak 510 on or off. ENGLISH 2.1 Turn on the jabra speak 510 2.2 Charging the Jabra Speak 510 Plug the Jabra Speak 510 USB cable into any available USB port on your computer to charge the battery. The battery light is red when charging, and green for 1 minute when fully charged.
1. Plug the Jabra Speak 510 USB cable into any available USB port on your computer. 2. Select the Jabra Speak 510 as the default audio device in Windows Control Panel sound settings, and in your softphone audio settings. ENGLISH 3.
If using a Jabra Speak 510+, the speakerphone and Jabra Link 370 are pre-paired and ready to use out of the box. ENGLISH 3.1 Connect to Jabra Link 370 To connect the speaker and Jabra Link 370: 1. Press and hold (2 secs) the Bluetooth button on the Jabra Speak 510 until the Bluetooth light flashes blue. Release the button when you hear the connection instructions. 2. Plug the Jabra Link 370 into any available USB port on your computer. 3. The connection is established when the light turns solid blue.
1. Press and hold (2 secs) the Bluetooth button on the Jabra Speak 510 until the Bluetooth light flashes blue. Release the button when you hear the connection instructions. ENGLISH 3.2 Connect to mobile device (Bluetooth) 2. Enable Bluetooth on your mobile device, and select the Jabra Speak 510 from the list of available Bluetooth devices. If prompted for a password enter 0000.
For privacy, a bluetooth headset can be connected to the Jabra Speak 510. 1. Plug the Jabra Speak 510 into any available USB port on your computer. ENGLISH 3.3 Connect to Bluetooth headset 2. Put the Bluetooth headset into pairing mode (refer to your headset manual for instructions). 3. Press and hold (8 secs) the Bluetooth button on the Jabra Speak 510 until the Bluetooth light flashes blue and then flashes green. Release the button when you hear ‘Connect to headset’. 4.
ENGLISH 4.
Press and hold (2 secs) the Bluetooth button to connect with a new Bluetooth device Reconnect/ disconnect with Bluetooth device Tap the Bluetooth button to reconnect/disconnect with a Bluetooth device Mute microphone Tap the Mute microphone button Voice assistant (off by default, Smartphone dependent) Press the Smart button (use Jabra Direct to enable voice assistants, e.g.
1. Press and hold the Bluetooth button and tap the Volume up or Volume down button to cycle between the connected devices. The connected devices will be announced. ENGLISH 4.2 Switch between bluetooth devices 2. Release the Bluetooth button when the correct device is announced. The Jabra Speak 510 will establish a connection with the device(s). When a connection has been established the device(s) will be announced. 4.
The Smart button is off by default. To use the Smart button to activate your smartphone’s voice assistant (e.g. Siri, Google Assistant, Cortana) or to speed dial a phone number on your smartphone or computer, install Jabra Direct on your computer and enable the Smart button in the Speak 510 settings. ENGLISH 4.
5.1 Jabra direct Jabra Direct is software designed to support, manage and enable optimal functionality for Jabra devices. It is highly recommended to download and install Jabra Direct. ENGLISH 5. Software Download the latest version - jabra.com/direct 5.2 Update Jabra Speak 510 firmware Firmware updates improve performance or add new functionality to Jabra devices. To update firmware: 1. Connect to a computer via USB. 2. Download and install Jabra Direct. 3.
6.1 FAQ View the FAQs on Jabra.com/speak510. ENGLISH 6. Support 6.2 How to care for your Jabra Speak 510 Always store the Jabra Speak 510 with the power off and safely protected. Avoid storage at extreme temperatures (above 70°C/158°F or below -20°C/-4°F). This can shorten battery life and may affect operation. High temperatures may also degrade performance. Do not expose the Jabra Speak 510 to rain or other liquids.
ENGLISH REV K jabra.