User Manual

27
ENGLISH
8.5 Conference mode
Up to three additional headsets can be
connected to one Jabra Link 400 for conference
mode.
1. Ensure the additional headset is turned off,
and then press and hold the Call button for 4
seconds.
2. Press and hold the button on the Jabra Link
400 for 1 sec to pair with the headset.
3. A voice prompt will play in the primary
headset. Press the Call button on the
primary headset to accept the additional
headset to the conference mode. The audio
will now be shared between the headsets. By
default, the additional headset will be
muted.
4. Repeat the steps for each additional headset.
To end the call for all headsets, press the Call
button on the primary headset.
Additional headsets can leave the conference
mode by pressing the Call button on the
headset. The conference mode will continue
for all other headsets.
Conference mode settings can be adjusted
using Jabra Direct.