Jabra Engage 75 User manual
018 GN Audio A/S. All rights reserved. Jabra ® is a trademark of GN Audio A /S. The Bluetooth ® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license. Made in China MODEL: WHB051BS WHB050HS Declaration of Conformity can be found on www.jabra.
1. Welcome.........................................5 2. What’s in the box..........................6 2.1 Stereo variant 2.2 Mono variant 2.3 Convertible variant 3. How to wear...................................9 3.1 Stereo/Mono headset 3.2 Convertible headset 3.3 How to change mono headset wearing styles 3.4 How to change the convertible headset EarGels 3.5 How to change the convertible headset EarHook 3.6 How to change the convertible headset wearing style 4. How to charge............................
6. How to use ................................. 23 6.1 Stereo/Mono headset overview 6.2 Convertible headset overview 6.3 Base overview 6.4 Base status icons 6.5 How to change language 6.6 How to adjust the microphone volume for desk phone calls 6.7 How to reset 7. How to make calls .................... 29 7.1 Basic call usage 7.2 Merge calls 7.3 Conference calls 7.4 Transfer a call from desk phone to headset 7.5 Transfer a call from headset to desk phone 7.6 Transfer a call from mobile device to headset 7.
Thank you for using the Jabra Engage 75. We hope you will enjoy it! Jabra Engage 75 features ENGLISH 1.
The Jabra Engage 75 comes with one of three different headset styles: stereo, mono, and convertible. ENGLISH 2. What’s in the box 2.
ENGLISH 2.
ENGLISH 2.3 Convertible variant Base Convertible headset EarHooks (medium and large) Headband Neckband Power cable Micro-USB cable EarGels (looped and normal) Telephone cable Note: The medium EarHook and normal EarGel are already attached to the headset.
3.1 Stereo/Mono headset The headset can be worn with the microphone on the left or the right. ENGLISH 3.
The headset can be worn on the left or the right ear. EarHook ENGLISH 3.
ENGLISH 3.3 How to change mono headset wearing styles 3.
Medium ENGLISH 3.5 How to change the convertible headset EarHook Large The EarHook with one dot is the medium size, and the EarHook with two dots is the large. The EarHooks are flexible, and can be bent to suit your ear for a secure and comfortable fit.
ENGLISH 3.
4.1 Connect to power ENGLISH 4. How to charge Plug the base into a power supply using the supplied power cable. It is recommended to connect the telephone or computer cables before connecting the base to a power supply (see Chapter 5 for more information).
ENGLISH 4.2 Charge the headset The headset will charge whenever it is docked in a base that is connected to a power supply. The status LED on the headset and the battery icon on the base will pulse to indicate the headset is charging. The stereo/mono headsets have up to 13 hours of battery, and the convertible headset has up to 9 hours of battery. All headsets take approx. 1.5 hours to fast charge to full. 40% of the battery will charge in approx. 30 minutes.
To conserve battery, the headset will automatically power off when it has not been docked for 30 minutes, has not been moved, and is not in use. ENGLISH 4.3 Headset PowerNap To end PowerNap, either move the headset (the headset has built-in motion sensors), press any button on the headset, or dock the headset in the base. PowerNap can be permanently turned off using Jabra Direct.
5.1 Connect to a desk phone with a headset port ENGLISH 5. How to connect This type of desk phone has a dedicated headset port. These phones typically have a button on the front panel for switching between the desk phone handset and the headset. 1. Plug the supplied telephone cable into the port marked on the base, and into the headset port on the desk phone. 2. Plug the base into a power supply using the supplied power cable. 3. Select a language on the base, and then start the setup wizard.
This type of desk phone does not have a dedicated headset port. ENGLISH 5.2 Connect to a desk phone without a headset port 1. Unplug the handset cable from the handset port on the desk phone, and plug it into the port on the base. 2. Plug the supplied telephone cable into the port marked on the base, and into the handset port on the desk phone. 3. Plug the base into a power supply using the supplied power cable. 4. Select a language on the base, and then start the setup wizard.
ENGLISH 5.3 Connect to a USB desk phone 1. Plug a micro-USB cable into the port marked on the base, and into an available USB port on your USB desk phone. 2. Plug the base into a power supply using the supplied power cable. 3. Select a language on the base, and do not start the setup wizard. The base is already configured for USB desk phones and does not require the setup wizard.
ENGLISH 5.4 Connect to a computer 1. Plug the supplied micro-USB cable into the port marked on the base, and into an available USB port on your computer. 2. Plug the base into a power supply using the supplied power cable. 3. Select a language on the base, and do not start the setup wizard. The base is already configured for computers and does not require the setup wizard. 4.
It is possible to pair and connect to two mobile devices. ENGLISH 5.5 Pair to a mobile device, or mobile devices, using Bluetooth 1. Plug the base into a power supply using the supplied power cable. 2. Tap to open the Settings menu, and tap to navigate down to Mobile device. 3. Tap to select New. Follow the onscreen pairing instructions to pair your mobile device to the headset.
ENGLISH 5.6 Pair to a mobile device using NFC Yes--No 1. Plug the base into a power supply using the supplied power cable. 2. Ensure NFC is enabled on your mobile device. 3. Hold the mobile device against the NFC logo on the base, and follow the instructions on your mobile device to complete the pairing. After pairing, the headset and base will automatically connect to your mobile device whenever the mobile device is turned on, within range of the base, and has Bluetooth enabled.
ENGLISH 6. How to use 6.1 Stereo/Mono headset overview Volume button Busylight Call button Status LED Mute button Volume button 6.
Mute NFC zone Answer call End/reject call Volume down Volume up Menu left Menu right Accept Menu ENGLISH 6.3 Base overview Back 6.
4x Mobile device Desk phone ENGLISH Four headsets in conference mode Computer Second mobile device 2 Target phone 2 Call on target phone 2 Held call Incoming call on mobile device Incoming call on desk phone Incoming call on computer 2 Caller ID Incoming call on second mobile device Incoming call with caller id 25
Onscreen text There are 16 available languages for the onscreen text: English, German, French, Chinese (simplified), Spanish, Czech, Danish, Dutch, Finnish, Hungarian, Italian, Norwegian, Polish, Russian, Swedish, and Turkish. ENGLISH 6.5 How to change language Headset voice announcements There are 5 available languages for the headset voice announcements: English, German, French, Japanese, and Spanish. To change language: 1. Tap to open the Settings menu, and tap to navigate down to Language. 2.
To adjust the desk phone microphone volume: 1. Tap on the base to open the Settings menu. 2. Tap or to adjust the desk phone microphone volume, and then tap to confirm your choice. ENGLISH 6.6 How to adjust the microphone volume for desk phone calls The microphone volume can be adjusted while you are on a call, however the microphone volume will reset to the default level when the call ends.
Resetting the headset and the base clears the list of paired devices and resets all settings. To reset: 1. Dock the headset in the base. 2. Hold for 2 seconds to open the Advanced settings menu. 3. Tap to select Base, and then tap to confirm your choice. 4. Tap to navigate down through the settings until Reset configuration is selected. 5. Tap to select Yes, and then tap to confirm your choice. The headset and base will reboot and all settings will return to their default values. ENGLISH 6.
ENGLISH 7. How to make calls 7.
Adjust volume The headset uses motion senses to detect which button is volume up and which is volume down, depending on the headset orientation Toggle Busylight Press both Volume buttons at the same time Mute/un-mute microphone Press the Mute button (stereo/mono headset) Mute/un-mute microphone Press the Mute button (convertible headset) ENGLISH Press the Volume buttons.
It is possible to merge an incoming call with a current call. To merge calls: 1. Hold the Call button (2 secs) on the headset, or tap on the base, to accept the incoming call. This will place the current call on hold. 2. Tap and select Yes to merge the calls. To unmerge the calls, tap Yes to unmerge the calls. ENGLISH 7.2 Merge calls and then select To end the merged call, dock the headset or press the Call button on the headset.
ENGLISH 7.3 Conference calls Add headset(s) to a conference call Up to three additional headsets can be connected to one base for conferencing. Primary headset Additional headset Primary headset 1. Undock the primary headset. 2. Dock an additional headset in the base. 3. Tap to add the headset as an additional conference headset. 4. A voice prompt will play in the primary headset. Press the Call button on the primary headset to accept the additional headset to the conference.
Up to three additional headsets can be connected to one base, without the need to dock the headsets. ENGLISH Add headset(s) to a conference call without docking 1. Tap on the base to open the settings menu, and navigate to Add headset. 2. Tap to switch to Pair without docking. 3. Tap to put the base into pairing mode. 4. Power off the additional headset by holding the Call button for 4 seconds. 5.
To end the call for all headsets, press the Call button on the primary headset, or dock the primary headset in the base. Additional headsets can leave the conference by pressing the Call button on the headset, or by docking the additional headset in the primary headset’s base (not the additional headset’s base). The conference call will continue for all other headsets.
ENGLISH 7.4 Transfer a call from desk phone to headset To transfer a call: 1. Select the desk phone as the target phone on the base. 2. Lift the headset from the base, or tap the Call button on the headset. If necessary, press the headset button on the desk phone. The audio will transfer from the desk phone handset to the headset. Do not hang up the desk phone handset until the call is finished.
ENGLISH 7.5 Transfer a call from headset to desk phone To transfer a call from the headset to a desk phone, lift the desk phone handset and then dock the headset in the base. The audio will transfer from the headset to the desk phone.
ENGLISH 7.6 Transfer a call from mobile device to headset To transfer a call: 1. Select the mobile device as the target phone on the base. 2. Lift the headset from the base, or tap the Call button on the headset. 3. Select Yes on the base to transfer the call audio to the headset. Do not end the call on the mobile device until the call is finished.
The headset and base can accept and handle multiple calls at the same time. Multiple call handling Answer incoming call and put current call on hold Tap on the base Switch between held call and active call Tap on the base Reject incoming call, while on a current call Tap on the base ENGLISH 7.
Headset, base, phone, and general settings can be changed on the base using the Basic settings menu, or the Advanced settings menu. ENGLISH 8. How to change settings Alternatively, all settings can be changed using Jabra Direct on your computer. Jabra Direct can be downloaded at jabra.com/direct. 8.1 Basic settings Tap to access the Basic settings menu.
New View instructions on how to pair the headset/base to a mobile device Devices View a list of paired mobile devices Disconnect Select to disconnect all paired mobile devices Delete pairing Select to unpair all mobile devices ENGLISH Mobile device settings Language settings Text Select the screen text language from a list of 16 languages Voice Select the headset voice language from a list of 5 langauges Ringtone settings Desk phone Select a ringtone and ringtone volume for incoming desk phon
Idle screen Select what should be displayed on the base when it is not in use Brightness Select the brightness of the screen and the screensaver ENGLISH Screen settings Clock settings* Hour format Select the clock format Set Set the time *Only available when Synchronize clock with computer is set to Off in Jabra Direct.
Hold (2 secs) to access the Advanced settings menu. ENGLISH 8.2 Advanced settings Headset settings Equalizer for calls Select an audio preference to use for all calls Optimize audio for music Select to optimize the audio for music, or to optimize for battery performance and reduced density issues Audio announcements Select the audio announcement type Audio protection Select the level of audio protection to be used.
Voice language Select the headset voice announcement language Busylight Select to enable or disable the headset busylight Headset conferencing Select to enable headset conferencing mode, allowing the connection of multiple headsets to the same call Pair without docking Select to enable pairing of a headset without docking it PowerNap Select to enable sleep mode when the headset has not been docked for 30 minutes, and has not been moved, and is not in use ENGLISH Sidetone Select the volume level
Button feedback volume Select the volume level of the sound made when you tap the buttons on the base Screen brightness Select the brightness level of the screen and the screensaver Wireless signal range Select the wireless range between the headset and base Record call Select to enable calls from mobile devices or desk phones to be recorded on your computer.
Select to enable incoming calls to be answered by undocking the headset Simultaneous ring Select which incoming call is displayed, if several connected phones ring simultaneously PowerNap Select to enable sleep mode if the base has been idle for 10 hours Base name View the base name.
Select Yes to open the Advanced desk phone settings menu Start setup Tap to navigate down through the available desk phone settings ENGLISH Desk phone settings Press to accept any changes made to the settings.
Tap to navigate down through the list of product information ENGLISH Product information 47
Jabra Direct is computer software designed to support, manage, and enable optimal functionality for your Jabra devices. ENGLISH 9. Jabra Direct Download via jabra.com/direct 9.1 Firmware update Jabra Direct will notify you when there is a firmware update available.
10.1 FAQ View the FAQs on jabra.com/engage. ENGLISH 10. Support 10.2 How to care for your device • It is recommended to keep the headset between -5°C and 45°C (23°F and 113°F). • Do not store the headset for extended periods of time without recharging the battery (max. three months). • If the headset or base becomes dirty, it is recommended to clean them with a soft, lint-free cloth that has been dampened with clean water. 10.
ENGLISH REV A jabra.
