© 2007 GN A/S. All rights reserved. Jabra® is a registered trademark of GN A/S. All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN A/S is under license. (Design and specifications subject to change without notice).
Thank you . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1 About your Jabra A7010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 What your Jabra A7010 can do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
What’s what Thank you 1 english English Thank you for purchasing the Jabra A7010 Bluetooth® Hub. We hope you enjoy it! This instruction manual will help you make the most of your Bluetooth Hub. About your Jabra A7010 What your Jabra A7010 can do The Jabra A7010 allows you to add a Bluetooth headset* to your standard desk phone. It is a ‘connectivity hub’ that enables your desk phone for wireless Bluetooth communication.
2 What type of desk phone do you have? English The Jabra A7010 can connect with your desk phone in three different ways, depending on the type of phone and accessory you have. Connecting your Jabra A7010 with your desk phone and power supply · Disconnect the handset from your desk phone (by unplugging the handset from the desk phone handset port). Please use the following checklist to determine the best way to connect to your desk phone.
· Connect the power supply (B) to your Jabra A7010’s power supply socket (10). · Connect the GN1000 to the AUX socket (5) on the Jabra A7010 (see GN1000 User Manual). · Connect the power supply (B) to the wall power socket. · You can use the ‘wire guide’ at the bottom of the Jabra A7010 to neatly guide the cable from the desk phone to the wall phone plug.
Your Jabra A7010 can be paired with multiple headsets. If the Jabra A7010 has been paired with multiple headsets, and more than one headset is in range, the Jabra A7010 will seek to establish communication with the most recently connected headset. Adjusting settings with a test call from your desk phone · Place your headset on your ear and tap the headset Answer/End button. NOTE: The Jabra A7010 will continue to ‘search’ for a headset for 5 minutes.
english English · I f you cannot hear a dial tone or it is unclear, slowly slide the Dial Tone Switch (1) from A through G until you hear a clear dial tone. The Dial Tone Switch (1) is preset to setting A, since that setting is most commonly used. · To end the call, tap the headset Answer/End button. The headset will be lowered automatically. · Dial a friend so you can test the volume of your microphone (how your voice sounds to others).
Switching from handset to headset You can switch from your desk phone handset to your headset during an active call. You might want to do this if, for example, the call was answered on the desk phone handset and you would prefer to use your headset. · Keep the desk phone handset off the hook. · Tap the headset Answer/End button. (The GN1000 will lift.) english English Switching from headset to handset You can switch from your headset to your desk phone handset during an active call.
4 For use with desk phone with headset port english English Some desk phones are equipped with a headset port, allowing a corded headset to be plugged in directly. When using the headset port, the handset remains in its cradle, making headset use easier. Please refer to your desk phone user manual for more information. NOTE: in the following pages, all references to “Tap the headset Answer/End button” refer to the action needed for most common Jabra headsets available.
English · Place your headset on your ear and tap the headset Answer/End button. english Adjusting settings with a test call from your desk phone NOTE: The Jabra A7010 will continue to search for a headset for 5 minutes. · W hen your headset and Jabra A7010 have paired successfully, the Jabra A7010 LED (2) will flash blue 10 times. Your headset may also give an audible or visual indication (see its user manual).
english English · Dial a friend so you can test the volume of your microphone (how your voice sounds to others). · To end the call, press the appropriate button on the desk phone AND tap the headset Answer/End button. · A djust the headset microphone volume (4) in the Jabra A7010 until your friend confirms that your voice can be heard at an appropriate level. (If you can hear your own voice in the headset, the microphone volume is probably too high.
Use english English Making and ending a call from your desk phone · Place the headset on your ear and tap the headset Answer/End button. · To end the call, press the appropriate button on your desk phone AND tap the headset Answer/End button. · Press the appropriate button on your desk phone to establish a dial tone. · Dial the desired number.
Answering and ending a call to your desk phone english English Your desk phone will give an audible indication that a call is incoming. · Place the headset on your ear and tap the headset Answer/End button. · Press the appropriate button on your desk phone to answer the call, and begin talking. Switching from headset to handset You can switch from your headset to your desk phone handset during an active call. You might want to do this if, for example, your headset battery is running low.
english English If you move too far from the Jabra A7010, the call will be routed to your desk phone handset. Return into range within 60 seconds and the call will be re-routed back to the headset. If you stay out of range for more than 60 seconds, the call may remain active (this is phone dependent, please check your desk phone user manual for more information). Remember! In general, you will get better performance when there are no obstructions between your headset and your Jabra A7010.
english English · C onnect the power supply (B) to the wall power socket. · You can use the ‘wire guide’ at the bottom of the Jabra A7010 to neatly guide the cable from the desk phone to the wall phone plug. NOTE: The Jabra A7010 will continue to ‘search’ for a headset for 5 minutes. · W hen your headset and Jabra A7010 have paired successfully, the Jabra A7010 LED (2) will flash blue 10 times. Your headset may also give an audible or visual indication (see its user manual).
Adjusting settings with a test call from your desk phone english English · Place your headset on your ear and tap the headset Answer/End button. · Dial a friend so you can test the volume of your microphone (how your voice sounds to others). · Lift your desk phone handset and listen for a dial tone in your headset. · A djust the headset microphone volume (4) in the Jabra A7010 until your friend confirms that your voice can be heard at an appropriate level.
English Making and ending a call from your desk phone · Place the headset on your ear and tap the headset Answer/End button. english Use · To end the call, replace the desk phone handset AND tap the headset Answer/End button. · Lift the desk phone handset and listen for the dial tone. · Dial the desired number.
English · Place the headset on your ear and tap the headset Answer/End button. english Answering and ending a call to your desk phone Your desk phone will give an audible indication that a call is incoming. · To end the call, replace the desk phone handset AND tap the headset Answer/End button. · Lift the desk phone handset to connect the call.
English If you move too far from the Jabra A7010, the call will be routed to your desk phone handset. Return into range within 60 seconds and the call will be re-routed back to the headset. If you stay out of range for more than 60 seconds, the call will remain in the handset until the handset is replaced or the call is transferred back to the headset by returning into range and tapping the headset Answer/End button.
8 English If your product is not working properly, please check the following: · Are all the cables connected correctly? · Is the AC adaptor plugged in? · Is the mains power supply on? · Has your headset been charged? · Is your headset turned on? · Is your headset disconnected from its charger? · Has the Dial Tone Switch (1) been adjusted correctly? · Has the microphone volume (4) been adjusted correctly? · Is the headset within range of the Jabra A7010? · Can your headset and Jabra A7010 ‘see’
