Operation Manual
5
ENgLiSh
JABRA BT2040 BLUETOOTH HEADSET
To pair the Jabra BT2040 with your mobile phone, just follow
these three easy steps:
1. Put the headset in pairing mode. When you turn on your Jabra
BT2040 for the rst time, the headset will automatically start up
in pairing mode – i.e. it is discoverable for your phone. When
the headset is in pairing mode, the LED indicator light is solid
blue.
2. Set your Bluetooth phone to ‘discover’ the Jabra BT2040. Follow
your phone’s instruction guide. First make sure that Bluetooth
is activated on your mobile phone. Then set your phone to
discover the headset. This usually involves going to a ‘setup,’
‘connect’ or ‘Bluetooth’ menu on your phone and selecting the
option to ‘discover’ or ‘add’ a Bluetooth device.
3. Your phone will nd the headset under the name: Jabra BT2040.
Your phone then asks if you want to pair with it. Accept by
pressing ‘Yes’ or ‘OK’ on the phone and conrm with the pass
-
key or PIN = 0000 (zeros). Your phone will conrm when pairing
is complete.
In case of unsuccessful pairing, put the Jabra BT2040 into pairing
mode manually. First, make sure the headset is o. Then press and
hold the answer/end button for approximately 5 seconds until
the LED has a solid blue light. The LED will ash before the light is
constant – keep holding down the button until light is constant.
When the headset is in pairing mode, repeat steps 2 and 3.
WEAR iT hoW yoU LikE iT
The Jabra BT2040 is ready to wear without an earhook – simply
insert it in your right or left ear. If you prefer to use the earhook,
click it on as shown in illustration 4 from Quick Start Guide.
The Jabra BT2040 is ready to wear on your right ear. If you prefer
the left ear, gently remove the earhook turn it 180˚ degrees and
reconnect it to the headset.
For optimal performance, wear the Jabra BT2040 and your mobile
phone on the same side of your body or within line of sight. In
general, you will get better performance when there are no ob-
structions between your headset and your mobile phone.