Jabra® BT2045 USER MANUAL
CONTENTS ABOUT YOUR JABRA BT2045 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 WHAT YOUR HEADSET CAN DO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENGLISH THANK YOU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ABOUT YOUR JABRA BT2045 A Answer/end button, on/off button ENGLISH THANK YOU Thank you for purchasing the Jabra BT2045 headset. We hope you enjoy it! This instruction manual will get you started and ready to make the most of your headset.
ENGLISH Specifications - Talk time up to 8 hours / standby time up to 10 days - Rechargeable battery with charging option from AC power supply, USB cable or car charger (USB cable and car charger not included) - Weight 10 grams - Operating range up to 10 meters (appr. 33 feet) - Headset and hands-free profiles (see glossary) - Bluetooth® version 2.1 + eSCO & EDR GETTING STARTED You should follow three steps before using your headset: 1. Charge your headset 2.
2 Hrs ENGLISH CHARGE YOUR HEADSET Make sure that your headset is fully charged for 2 hours before you start using it. Use the AC power supply to charge from a power socket. When the light indicator (LED) has a solid LED light, your headset is charging. When the solid LED light turns off, it is fully charged. Use only the charger provided in the box - do not use chargers from any other devices as this may damage your headset.
PAIRING IT WITH YOUR PHONE Headsets are connected to phones using a procedure called ‘pairing’. By following a few simple steps, a phone can be paired with a headset in a matter of minutes. ENGLISH Please note that the LED indicator light turns off after 1 minute to save battery. Headset is still active, and light will flash again after tap on the Answer/End button or any call activity.
ENGLISH Put the headset in pairing mode manually In case of unsuccessful pairing, put the Jabra BT2045 into pairing mode manually. Make sure the headset is off. Press and hold the answer/end button for approximately 5 seconds until the LED has a constant light. The LED will flash before the light is constant – keep holding down the button until light is constant. Then follow the steps 2 and 3 above.
Reject a call* - Press the answer/end button when the phone rings to reject an in-coming call. Depending on your phone settings, the person who called you will either be forwarded to your voice mail or hear a busy signal. ENGLISH Make a call - When you make a call from your mobile phone, the call will (subject to phone settings) automatically transfer to your headset. If your phone does not support this function, tap on the answer/end button on the Jabra BT2045 to receive the call in the headset.
What you see What that means Solid light In pairing mode - see Pairing section. Very slow single flash Connected to phone and in standby mode.* Slow triple flash Not connected to phone and in standby mode.* Regular double flash Active on call Quick double flash Incoming/Outgoing call Quadruple flash Battery low ENGLISH WHAT THE LIGHTS MEAN * BT2045 is equipped with Jabra Discreet Light feature, meaning that light indicator (LED) turns off after 1 min of non-activity.
ENGLISH If you are on a call and receive a second call you will be alerted by a tone.
I cannot use Reject call, Call on hold, Redial or Voice dialing - These functions are dependent on your phone supporting them. Please check your phone’s manual for further details. ENGLISH Will the Jabra BT2045 work with other equipment? - The Jabra BT2045 is designed to work with mobile phones. It can also work with other devices that are compliant with Bluetooth® version 1.1, 1.2, 2.0 or 2.1 and support a headset and/or hands-free profile. NEED MORE HELP? 1. Web: www.jabra.
00800 722 52272 70 25 22 72 0800 1826756 00800 722 52272 900 984572 0800 900325 800 786532 00800 722 52272 0800 0223039 800 61272 00800 722 52272 0801 800 550 00800 722 52272 00800 722 52272 020792522 0800 0327026 +7 916 246 69 00 00800 722 52272 ENGLISH 3.
ENGLISH GLOSSARY 1 Bluetooth® Bluetooth® is a radio technology that connects devices, such as mobile phones and headsets, without wires or cords over a short distance (approx. 10 meters/33 feet). is safe to use. It is secure too, so once a connection has been made no-one can listen in and there is no interference from other devices either. Get more information at www.bluetooth.com. 2 Bluetooth® profiles are the different ways that devices communicate with other devices.
© 2011 GN Netcom US, Inc. All rights reserved. Jabra® is a registered trademark of GN Netcom A/S. All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom A/S is under license. (Design and specifications subject to change without notice). 81-03389 B © 2011 GN Netcom A/S. All rights reserved. Jabra® is a registered trademark of GN Netcom A/S.
