BT4010 USER MANUAL
english What your headset can do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 USING YOUR JABRA BT4010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 english Thank you . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 About your Jabra BT4010 . . . . . . . . . . . . . . .
About your Jabra BT4010 PLEASE NOTE: Before using your new Jabra BT4010 headset, you must fully charge it and set it up by ‘paring it’ with your selected Bluetooth device. 1 LCD display With battery, Bluetooth and call indicator 2 Answer/End button Press and hold to turn the headset on and off Tap to answer/end a call 3 Charger socket 4 Volume up/Volume down 5 Earhook 3 2 english Thank you Thank you for purchasing the Jabra BT4010 Bluetooth® headset.
english What your headset can do Your Jabra BT4010 lets you do all this: - Answer calls - End calls - Reject calls* - Voice dialing* - Last number redialing* - Call waiting* - Put call on hold* LCD Display - Battery status - Bluetooth connection status - Call status Specifications - Talk time up to 6 hours/standby time up to 150 hours - Rechargeable battery with charging option from AC power supply.
Instruction Duration of press Tap Press briefly Double tap 2 quickly repeated taps Press Approx: 1 seconds Press and hold Approx: More than 3 seconds english USING YOUR JABRA BT4010 The Jabra BT4010 is easy to operate. The answer/end button on the headset performs different functions depending on how long you press it. How the display works Bluetooth Indicator Battery Icon Call Indicator No battery indicator: Headset off Less than 10 min.
What you see What you see 1st battery level flashing Less than 30% 2nd battery level flashing Between 30 - 70% 3rd battery level flashing More than 70% All battery levels on, no flashing Fully charged english 1. Charge your headset Make sure that your Jabra BT4010 headset is fully charged before you start using it. Use the AC adaptor to charge from a power socket.
Manual pairing You can manually put your Jabra BT4010 into pairing mode, if you want to pair with a second phone or Bluetooth device: 1. Make sure the headset is off. 2. Press and hold the answer / end button for approx 5 sec. until the Bluetooth indicator on the LCD display starts flashing. 3. Set your Bluetooth phone to discover your headset as described above. english 3. Your phone will find the Jabra BT4010. Your phone then asks if you want to pair with it.
End a call - Tap the answer/end button to end an active call. Make a call - When you make a call from your mobile phone, the call will (subject to phone settings) automatically transfer to your headset. If your phone does not allow this feature, tap on the Jabra BT4010’s answer/end button to transfer the call to the headset. english How to Answer a call - Tap the answer/end button on your headset to answer a call.
What you see Battery level/Talk time 3 Battery levels Between 4-6 hours talk time 2 Battery levels Between 2-4 hours talk time 1 Battery levels Less than 2 hours talk time english Battery Indicator When the Jabra BT4010 is turned on, you will always know the battery level from the LCD display. Troubleshooting & FAQ I hear crackling noises - Bluetooth is a radio technology, which means it is sensitive to objects between the headset and the connected device.
The device is not connected to my headset in time to answer an incoming call If the headset is off and is turned on when a call is incoming, the device and headset might not connect in time for the call to be answered. In order to avoid such inconveniences please keep the headset on, in range and connected. english I cannot use Reject call, call on hold, Redial or voice dialling These features are dependent on the ability of your phone to support a hands-free profile.
english Taking care of your headset - Always store the Jabra BT4010 with the power off and safely protected - Avoid storage at extreme temperatures (above 45°C/113°F – including direct sunlight – or below -10°C/14°F). This can shorten battery life and may affect operation. - High temperatures may also degrade performance. Do not expose the Jabra BT4010 to rain or other liquids. WARNING! EXCESSIVE VOLUME LEVELS CAN CAUSE PERMANENT HEARING DAMAGE. USE AS LOW A VOLUME AS POSSIBLE.
english SAFETY INFORMATION! • Use of a headset will impair your ability to hear other sounds. Use caution while using your headset when you are engaging in any activity that requires your full attention. • If you have a pace maker or other electrical medical devices, you should consult your physician before using this device. • This package contains small parts that may be hazardous to children and should be kept out of reach from children.
english • Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. • If left unused, a fully charged battery will lose its charge over time. • Leaving the device in hot or cold places, such as in a closed car in the summer and winter conditions, will reduce the capacity and lifetime of the battery. • Always try to keep the battery between 15°C and 25°C (59°F and 77°F).
english Charger warning! • When you disconnect the power cord or any enhancement, grasp and pull the plug, not the cord, never use a charger that is damaged. • Do not attempt to disassemble the charger as it may expose you to dangerous electric shock. Incorrect reassembly can cause electric shock or fire when the product is subsequently used. • Avoid charging your headset in extremely high or low temperatures and do not use the charger outdoors or in damp areas.
Jabra bt4010 english address. (d) daytime telephone number, and (e) reason for return. As part of GN Netcom’s efforts to reduce environmental waste you understand that the product may consist of reconditioned equipment that contains used components, some of which have been reworked. The used components all live up to GN’s high quality standards and comply with the GN product performance and reliability specifications. You understand that replaced parts or components will become the property of GN.
english WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHAT SO EVER, INCLUDING BUT NOT LIMITED TO THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE. NOTE! This warranty gives you specific legal rights. You may have other rights which vary from location to location. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or implied warranties, so the above exclusions may not apply to you.
english 3. Pairing creates a unique and encrypted link between two Bluetooth devices and lets them communicate with each other. Bluetooth devices will not work if the devices have not been paired. 4. Passkey or PIN is a code that you enter on your Bluetooth enabled device (e.g. a mobile phone) to pair it with your Jabra BT4010. This makes your device and the Jabra BT4010 recognize each other and automatically work together. 5. Standby mode is when the Jabra BT4010 is passively waiting for a call.
Type: BT4010 IC: 2386C-BT4010 Made in China © 2008 GN Netcom A/S. All rights reserved. Jabra® is a registered trademark of GN Netcom A/S. All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom A/S is under license. (Design and specifications subject to change without notice). www.jabra.