Bluetooth Headset User Manual BT150

4
5
Wear it how you like it
4
The Jabra BT150 is ready to wear on your right ear. If you prefer the left,
gently flip and rotate the earhook 180°. (See fig. 2
)
For optimal performance, wear the Jabra BT150 and your mobile phone
on the same side of your body or within line of sight. In general, you will
get better performance when there are no obstructions between your
headset and your mobile phone.
(See fig. 5)
Answer a call
•
Tap the answer/end button on your headset to answer a call
End a call
•
Tap the answer/end button to end an active call
Reject a call (Dependent on your phone supporting this feature)
•
Press the answer/end button when the phone rings to reject an
incoming call. Depending on your phone settings, the person who
called you will either be forwarded to your voice mail or hear a busy
signal
Make a call
•
When you make a call from your mobile phone, the call will (subject to
phone settings) automatically transfer to your headset
Activate voice dialing (Dependent on your phone supporting this
feature)
•
Tap the answer/end button. For best results, record the voice-dialing
tag through your headset. Please consult your phone’s user manual for
more information about using this feature
Redial last number (Dependent on your phone supporting this feature)
•
Press the answer/end button
Adjust sound and volume
•
Press the volume up or down (
+
or
–
) to adjust the volume
(See fig. 1)
How to...
5
Before you use your Jabra BT150, you need to pair it with your mobile phone.
1. Put the headset in pairing
2
mode
Make sure that the headset is on.
Press the answer/end button and press the volume up (
+
) button at
the same time, until a solid blue light comes on.
2. Set your Bluetooth phone to ‘discover’ the Jabra BT150
Follow your phone’s instruction guide. This usually involves going to a
‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and selecting the
option to ‘discover’ or ‘add’ a Bluetooth device.* (See example from a
typical mobile phone in fig. 4
)
3. Your phone will find the Jabra BT150
Your phone then asks if you want to pair with it. Accept by pressing ‘Yes’
or ‘OK’ on the phone and confirm with the passkey or PIN
3
= 0000
(4 zeros)
.
Your phone will confirm when pairing is complete. In case of
unsuccessful pairing, repeat steps 1 to 3.
Pair it with your phone
3
Turn on your headset
2
•
Press and hold the answer/end button to turn on your headset.
•
Press and hold the answer/end button to turn off your headset.
What the lights mean
6
What you see What this means about your headset
Flashing blue light Flashing every second: active on a call
Flashing blue light Flashing every three seconds: in standby mode
4
Flashing red light Running low on battery
Solid blue light Charging
Solid blue light off Fully charged
Solid blue light In pairing mode – (See section 3
)