+ Jabra® CLIPPER User manual www.jabra.
Contents WHAT YOUR JABRA CLIPPER DOES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 english THANK YOU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ABOUT YOUR JABRA CLIPPER . . . . . . . . . . . . . . . . . . . . . . . . .
ABOUT YOUR JABRA CLIPPER english THANK YOU Thank you for purchasing the Jabra CLIPPER Bluetooth® wireless technology Stereo Headset. We hope you enjoy it! This instruction manual will get you started and ready to make the most of your headset. A Microphone B Charging connector C LED D Multi-Function button E 3.
english WHAT YOUR JABRA CLIPPER DOES The Jabra CLIPPER lets you listen to stereo music through your Bluetooth® enabled mobile phone or music player, while ensuring that you never miss a call.
GETTING STARTED 1 Charge your headset (approximately 2 hours) 2 Activate Bluetooth® on your mobile phone (refer to the manual for your mobile phone) 3 Pair your headset to your mobile phone english Follow these three steps before using your headset: CHARGING YOUR JABRA CLIPPER Make sure that your Jabra CLIPPER is fully charged before you start using it for the first time. While charging, the battery indicator changes from red to green, when fully charged. Charging time is approximately 2h.
2. Set your Bluetooth® phone or device to search for the Jabra CLIPPER - Follow your phone’s instruction guide. First make sure that Bluetooth® is activated on your mobile phone. Then set your phone to search for the headset. This usually involves going to a ‘setup,’ ‘ connect’ or ‘Bluetooth®’ menu on your phone and selecting the option to search for or ‘add’ a Bluetooth® device.* english 1.b.
HOW TO The Jabra CLIPPER is easy to operate. The buttons performs different functions depending on how long you press them: Duration of press Tap Press the button briefly Double tap Press the button briefly two times within 0.5 seconds Press Press the button approximately 1 second Press and hold Press the button approximately 4 seconds english IMPORTANT: DO NOT EXTEND THE METAL-CLIP BY MORE THAN FOUR (4) MILLIMETERS, AS IT WILL BEND OUT OF SHAPE PERMANENTLY.
End a call - Tap the Multi-Function button to end an active call. Reject a call** - Press and hold the Multi-Function button when the phone rings to reject an incoming call. Depending on your phone settings, the person who called you will either be forwarded to voice mail or hear the busy signal. english Answer a call - Tap the Multi-Function button to answer a call.
LED light Solid Blue In pairing mode – see ‘Pair Jabra CLIPPER to a phone or other device’ Slow single blue flash Connected to a phone and in standby mode Single blue flash Connected to phone and active on call Quick blue double flash Incoming call Solid red Charging Solid green Fully charged Single red flash Low Battery english What the LED means: The LED on the front side of Jabra CLIPPER indicates different states of the product: The Jabra CLIPPER Display LED turns off after 30 seconds of
The Jabra CLIPPER is capable of having two different Bluetooth® devices connected to the headset at the same time – e.g. a mobile phone and a PC for Internet telephony (VoIP). This means that for example, you can use the same headset for both listening to music from your mobile phone as well as answering mobile phone calls and use it for Internet telephony (e.g. Skype or Google Talk) at the same time. Please note: Jabra CLIPPER does not support two mobile phones at the same time.
I have pairing problems - You may have deleted the pairing connection in your mobile phone – follow the pairing instructions in ‘Pair Your Headset to a Phone or other Device ‘. english I cannot hear the phone call in the headset - Increase the volume on the Jabra CLIPPER. - Make sure your phone is connected to the headset by i.e. tapping the Multi-Function button, or viewing the LED indicator.
www.jabra.com (for the latest support info and online User Manuals) 2. E-mail: Deutsch English Español Français Italiano Nederlands Polska Scandinavian Россия support.de@jabra.com support.uk@jabra.com support.es@jabra.com support.fr@jabra.com support.it@jabra.com support.nl@jabra.com support.pl@jabra.com support.no@jabra.com support.ru@jabra.com Information: info@jabra.com 3.
english Taking care of your headset - Always store the Jabra CLIPPER with the power off and safely protected - Avoid storage at extreme temperatures (above 45°C/113°F – including direct sunlight – or below -10°C/14°F). This can shorten battery life and may affect operation. High temperatures may also degrade performance. - Do not expose the Jabra CLIPPER to rain or other liquids.
© 2010 GN Netcom US, Inc. All rights reserved. Jabra® is a registered trademark of GN Netcom A/S. All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom A/S is under license. (Design and specifications subject to change without notice). 81-03134 A © 2010 GN Netcom A/S. All rights reserved. Jabra® is a registered trademark of GN Netcom A/S.
