Owner's Manual

7
english
JABRA EXTREME2
tURnInG YoUR HeADset on AnD oFF
- Slide the on/o button forward on the side of the headset to
turn on the headset. The LED will ash green for a second when
the headset is on.
- Slide the on/o button backward to turn o the headset
pAIRInG It WItH YoUR pHone
Headsets are connected to phones using a procedure called
‘pairing’. By following a few simple steps, a phone can be paired
with a headset in a matter of minutes.
As described in the section JABRA VOICE GUIDANCE above the
pairing process is supported by voice prompts.
1. Put the headset in pairing mode
- When you turn on your Jabra EXTREME2 for the rst time, the
headset will automatically start up in pairing mode – i.e. it is
discoverable for your phone. When the headset is in pairing
mode the LED is ashing blue.
2. Set your Bluetooth® phone to ‘discover’ the Jabra
EXTREME2
- Follow your phone’s instruction guide. First make sure that
Bluetooth® is activated on your mobile phone. Then set your
phone to discover the headset. This usually involves going
to a ‘setup,’ ‘connect’ or ‘Bluetooth®’ menu on your phone and
selecting the option to ‘discover’ or ‘add’ a Bluetooth® device.*
3. Your phone will nd the Jabra EXTREME2
- Your phone will find the headset under name “Jabra
EXTREME2”. Your phone then asks if you want to pair with the
headset. Accept by pressing ‘Yes’ or ‘OK’ on the phone and
confirm with the passkey or PIN = 0000 (4 zeros) . Your phone
will confirm when pairing is complete.
* Phone dependent