Manual

11
english
Jabra EXTREME  FOR PC
I cannot hear anything in my headset
- Increase the volume in the headset.
- Ensure that the headset is paired to a device that is playing.
- Make sure your phone is connected to the headset by tapping
the Answer/End button.
I am having pairing problems
- You may have deleted your headset pairing connection in your
mobile phone. Follow the pairing instructions.
I want to reset the headset
- It is possible to reset and test the headset by ’pressing and
holding’ all three buttoms at the same time. The red, blue and
green light will light up in a white light. In this mode, the pairing
list is reset, and you can test if the headset works as you will be
able to hear audio in the speaker from the microphone.
- The headset will automatically turn o after approx. 10 seconds.
The next time you power on, the headset will go into pairing
mode as the rst time you powered your new EXTREME on.
Will the Jabra EXTREME work with other Bluetooth® equipment ?
- The Jabra EXTREME is designed to work with Bluetooth® mobile
phones. It can also work with other Bluetooth® devices that are
compliant with Bluetooth® version 1.1 or higher and support a
headset, hands-free and/or advance audio distribution prole.
I cannot use Reject call, call on hold, Redial or voice dialling
These features are dependent on the ability of your phone to
support a hands-free prole. Even if the handsfree prole is
implemented reject call, call hold and voice dialing are optional
features which are not supported by all devices. Please consult
your device manual for details.
Please note that some features can only be operated from the
primary device e.g. voice dial using Jabra EXTREME with 2 mobile
phones.
For use with your PC you need to have Jabra PC Suite installed and
running on your PC to use these functions. Please download Jabra
PC Suite at www.jabra.com/jabrapcsuite.