Owner's Manual
5
english
JABRA DRIVE
GettInG stARteD
You should follow three steps before using your speakerphone
1 Charge your Jabra DRIVE
2 Turn your Jabra DRIVE on
3 Pair your Jabra DRIVE with your mobile phone
The Jabra DRIVE is easy to operate. The answer/end button on the
speakerphone performs dierent functions depending on how
long you press it.
CHARGInG YoUR JABRA DRIVe
Make sure that your speakerphone is fully charged for two hours
before you start using it.
Use the USB cable to connect Jabra DRIVE to the car charger. Plug
the car charger into your car’s power outlet. The status light will
light up red while charging. When fully charged the status light
turns green. Jabra DRIVE can be charged outside your car by only
using the USB cable. Use only the charger provided in the box - do
not use chargers from any other devices as this may damage your
speakerphone.
Please note: The lifetime of the battery will be signicantly
reduced if your device is left uncharged for a long period. We
therefore recommend that you recharge your device at least once
a month.