Owner's Manual

6
english
JABRA DRIVE
tURnInG YoUR JABRA DRIVe on AnD oFF
Slide the on/o switch to turn the speakerphone on or o.
Sleep mode and Auto OFF
When not connected to a phone, the speakerphone turns o
automatically after 10 minutes. Use the on/o switch to turn the
speakerphone on again.
On/O
PAIRInG YoUR JABRA DRIVe WItH YoUR PHone
Jabra DRIVE is connected to a mobile phone using a procedure
called ‘pairing’. By following a few simple steps, a phone can be
paired with the speakerphone in a matter of minutes.
1 Activate Bluetooth® on your mobile phone
Please check the manual for your mobile phone.
2 Put the speakerphone in pairing mode
When you turn on your Jabra DRIVE for the rst time, the
speakerphone will automatically start up in pairing mode – i.e.
it can be detected by your phone. When the speakerphone is in
pairing mode the status light will ash rapidly blue.
3 Set your Bluetooth® phone to ‘search’ for the JABRA DRIVE
Follow your phone’s instruction guide. First make sure that
Bluetooth® is activated on your mobile phone. Then set your
phone to search for devices. This usually involves going to a ‘setup,’
‘connect’ or ‘Bluetooth®’ menu on your phone and selecting the
option to ‘search’ or ‘add’ a Bluetooth® device.*
* Phone dependent