Owner's Manual

english

JABRA DRIVE

4 Your phone will nd the Jabra DRIVE

Your phone will nd the speakerphone under the name “JABRA

DRIVE”. Your phone then asks if you want to pair with the JABRA

DRIVE. Accept by pressing ‘Yes’ or ‘OK’ on the phone and/or

conrm with the passkey or PIN = 0000 (4 zeros). Your phone will

conrm when pairing is complete.

CONNECTIVITY

SELECT

MobilSurf

BLUETOOTH

Infrared port

Wap options

Synchronization

Networks

DEVICES FOUND

Jabra DRIVE

Passkey:

****

HANDSFREE

SELECT

Jabra DRIVE

added.

The handsfree is

now ready for use

SELECT

Manual pairing mode

If you wish to use the speakerphone with a dierent phone, or

if the pairing process was interrupted, you can manually set the

speakerphone to pairing mode.

Turn the speakerphone on. Press and hold the answer/end button

for approximately 5 seconds until the status light stars blinking

rapidly blue. Then repeat steps 2. and 3. in the above pairing

guide.

ConneCtInG WItH YoUR PHone AUtoMAtICALLY

Pairing is only needed the rst time a speakerphone and phone

are used together. When the speakerphone and phone have

been paired once they will automatically connect when the

speakerphone is on and Bluetooth® is activated on the phone. The

speakerphone can be used when it is “connected” to the phone. If

the devices are paired, but do not immediately connect, tap the

answer/end button.