Jabra LINK™ 220 Jabra LINK™ 220a USER MANUAL www.jabra.
© 2009 GN Netcom A/S. All Rights Reserved. This user guide is published by GN Netcom A/S. The information in this user guide is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by GN Netcom A/S. GN Netcom A/S assumes no responsibility or liability for any errors or inaccuracies that may appear in this user guide. Written and designed at GN Netcom A/S, Lautrupbjerg 7, 2750 Ballerup, Denmark, www.jabra.com.
THANK YOU Thank you for purchasing the Jabra LINK™ 220/220a Enabler. We hope you enjoy it! This instruction manual will get you started and ready to make the most of your enabler.
HOW TO CONNECT ENABLER TO HEADSET Plug the QD to the QD of any Jabra GN corded headset. HOW TO CONNECT ENABLER TO PC Plug the USB plug into a free USB port on your PC. The first time connected, your PC displays a small pop-up message in the task bar to indicate that a new device has been found. You are now ready to use the enabler. HOW TO SET THE HEARING PROTECTION LEVEL ON HEADSET See the section about using Jabra PC Suite below for details.
INSTALLING THE JABRA PC SUITE To install the Jabra PC Suite, do the following: 1. Download the Jabra PC Suite installer from www.jabra.com. 2. Run the setup.exe program included with the download. This will install Jabra PC Suite on your computer. 3. Follow the instructions on your computer screen. Installation is very simple and should take just a minute or so. Please note the following as you work through the installation wizard: - Jabra PC Suite requires Microsoft .NET Runtime 3.5.
Hearing risk is evaluated as a function of both volume and duration. Therefore, the maximum sound level should be lowered as the number of hours you spend using the headset increases. The enabler offer a choice of four protection levels. These features protect your hearing by preventing acoustic shocks and limiting the maximum noise exposure from the headset during your workday. This system is called Intellitone™, which is only available from Jabra.
CERTIFICATION AND SAFETY APPROVALS CE This product is CE marked according to the provisions of the R & TTE. Directive (99/5/EC). Hereby, GN, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information please consult http://www.jabra.com.
JABRA® IS A REGISTERED TRADEMARK OF GN NETCOM A/S MADE IN CHINA 8 www.jabra.com 32-00686 H WWW.JABRA.