Installation Instructions

More info on the website,
Jact.com
JMate
JMate strap x 2 (260mm/290mm)
USB charging cable
① ②
2. Turn on Location and Bluetooth on mobile setting. Allow Jacfit
app to use them while rst download.
①
3. Open the Jact app and enter “Boxing” mode.
②
4. Knock JMate to wake up. When
the LED indicator lights up
“Green”, you will see the sensor
ID appears on the Bluetooth
setting.
5. Click the ID and press “Connect”
to Boxing mode. If connected,
the indicator light will become
“Blue”.
Scan QR code to download the
Jact App
iOS Android
Charging
1. Attach the small end of the USB cable to the
magnetic charging port on your device.
2. Plug the large end of the USB cable into a
USB charging port.
3. LED indicator will light up “Red” until
charging is completed. Note: When indicator
flashes "Green" means battery is low.
Please charge.
Installation
1. Align JMate and
strap with Jact
logo.
2. Connect them with
hook magic tape.
JMate Boxing Mode
1. Knock JMate and check
the indicator light. Wear
it on your “Right wrist”
and the indicator light
side facing you.
Boxing
RunBike
Bluetooth Setting
Device list
JMate
Connect
Skip
"Jact" Would Like to
Use Bluetooth
OKDon't Allow
Jact requries to use Bluetooth to
connect with the device