MODEL 766B TRANSMISSION JACK 1/2 TON CAPACITY USER'S MANUAL Jackco Transnational Inc. © 2012 South El Monte, CA 888-452-2526 www.jackco.
FOR YOUR SAFETY Read all instructions, warnings and cautions carefully. Follow all safety precautions to avoid personal injury or property damage during system operation. Jackco cannot be responsible for damage or injury resulting from unsafe product use, lack of maintenance or incorrect product and/or system operation. Contact Jackco when in doubt as to the safety precautions and operations. Failure to comply with the following cautions and warnings could cause equipment damage and personal injury.
Specifications Capacity 1/2 Ton Base Size(L x W) 37" x 31" Min Height 38" Max Height 74 1/2" Net Weight 154 Lbs Assembly • Assembly the swivel casters on the jack legs using lock washers and nuts provided. • Assemble the legs (with the casters) to the jack's base, and slightly secure with the Allen socket bolts and lock washers provided. • Position the jack (with legs) on a hard level surface.
Model: 766B Parts List
1-10 1-11 1-12 1-13 1-14 1-15 1-16 1-17 1-18 1-19 1-20 1-21 1-22 1-23 1-24 1-25 1-26 1-27 1-1 1-2 1-3 1-4 1-5 1-6 1-7 1-8 1-9 Part No.
Maintenance Regularly lubricate all moving parts of the jack. Pay special attention to the lift screw and related linkages. • A meidum weight lubricating grease sould be used on all external moving parts, such as bearing surface, pivot points tilt screws, etc. • Regularly check the oil level. With the saddle fully lowered, remove the oil filler screw, and check the oil level. Oil should be at the bottom of the filler screw holes. Fill if nessary. • Use only hydraulic jack oil.
