MODEL 811 10 TON BODY AND FRAME REPAIR KIT USER'S MANUAL Jackco Transnational Inc. © 2009 South El Monte, CA 888-452-2526 www.jackco.
FOR YOUR SAFETY Read all instructions, warnings and cautions carefully. Follow all safety precautions to avoid personal injury or property damage during system operation. Jackco cannot be responsible for damage or injury resulting from unsafe product use, lack of maintenance or incorrect product and/or system operation. Contact Jackco when in doubt as to the safety precautions and operations. Failure to comply with the following cautions and warnings could cause equipment damage and personal injury.
INSTRUCTION How to operate Release Valve Turn knob CLOCKWISE and pump handle for applying pressure. Turn knob counterclockwise to release pressure. Pump Position It is possible to hold pump in any possible from horizonal to vertical but always keep the hose end of the pump down when above the horizontal position Oil Level Retract the ram that is connected to the pump. Place pump in an upright position as shown. Remove filler plug and add hydraulic oil until it is level with the full mark on the dip stick.
Set Up Possible configurations for the 10 ton ram and attachments.
Load Capacities The capacity of this equipment is significant affected by the number of attachments used and the type of load supplied several typical hook-ups are illustrated below. The approximate load capacity if each set up is noted with illustration. When using two or more extension tubes together, always position the shortest tube farthest away from the ram.
Parts List Part No. 811-01 811-A02 811-A03 811-A04 811-A05 811-07 811-11 811-12 811-13 811-14 811-15 811-16 811-17 811-18 811-40 811-41 87006 Description Blow Mold Case 24" Extension Tube 21" Extension Tube 10" Extension Tube 5" Extension Tube Serrated Saddle Spreader Ram 3 1/4" Rubber Head Flat Base Spreader Ram Toe Spreader Plunger Toe Wedge Head 90° V-Base Lock on Connector 10 Ton Hydraulic Unit 10 Ton, 6" Stroke Ram 6 ft.
Hydraulic Spreader Assembly 1/2 Ton Capacity Part No.
Hydraulic Ram Assembly 10 Ton Capacity Part No. 811-R01 811-R04B 811-R04A 811-R05 811-R06 811-R07B 811-R08B 811-R09B 811-R10 811-R11 Description Cylinder Ram Bearing Bearing Bushing Cap Ferrule(C2600p) V Seal (Uletan) V Seal (SS400) Spreader Washer Part No.
Hydraulic Body&Frame Pump 10 Ton Capacity Part No. 11-P01B 11-P02 11-P04 11-P05 11-P06 11-P07 11-P08 11-P09 11-P10A 11-P12 11-P13 11-P14 11-P15 11-P18 11-P22 11-P23 11-P24 11-P25 11-P26 Description Pump Housing Filter Seal Pump Reservoir Reservoir End Cap Pump Foot Nut-Housing O-Ring Dip Stick(Oil Level CK) Ball Valve Ball Valve Spring Overload Stem Spacer Seals (Complete Set) Seal Lower Spanner Nut Seal Upper Spanner Nut Part No.
LIMITED ONE YEAR WARRANTY Jackco Transnational Inc. warrants all Jackco equipment and tools to the original purchaser against any manufacturing defect in material or workmanship for a period of one (1) year from the original date of purchase.
