Instructions / Assembly

Installation:
Note: The below serves only as a general in-
stallation guide. Please refer to your local
state and/or local plumbing regulations for
details pertaining to your systems design, in-
stallation and maintenance requirements.
1. Excavate hole large enough to accommodate
basin, backfill material and inlet piping
2. Add 4 to 6 inches of clean backfill material or
concrete to the bottom of the hole, making
sure that it is level, compacted and smooth
3. Place the basin in the hole and make sure
that it is level
4. Carefully backfill with naturally rounded gravel
or stone (larger than 3/8 in. and smaller than
3/4 in. diameter) around the periphery of the
basin
5. Connect all piping as required
6. Finish floor around the basin as required
Warranty:
www.jackelinc.com
574-256-5635
Tools Required
Safety Goggles
Tape Measure
Shovel
For more information please visit our website: www.jackelinc.com/warranty
Installation Guide
Perforated Sump Basin ( 18 x 22 in. )
Model: SF20-DR
Package Contents