Dishmachine Maintenance Instructions Wash TankThermostat Replacement (From EGO brand to Stemco) 07610-003-18-19 A July 26, 2006
www.jacksonmsc.com The instructions provided here are for maintenance personnel only. Unauthorized persons should not attempt any of the steps contained in these instructions. Warning: many of the instructions and steps within this document require the use of tools. Only authorized personnel should ever perform any maintenance procedure on the dishmachine! PREPARATION 1. Power must be secured to the unit at the service breaker.
www.jacksonmsc.com AFTER MAINTENANCE ACTIONS Once the new thermostat is installed, it will be necesary to ensure that it operates at the required and appropriate ranges. The new thermostat has an adjustment that can be turned using a small flathead screwdriver. Several cycles will need to be run on the unit while observing the final rinse temperature. The thermostat needs to cycle so that the final rinse water meets the indicated minimums on the machine data plate for every cycle.