Dishmachine Maintenance Instructions JPX-300 Series Door Gasket Kit Installation 07610-003-14-63 A December 13, 2005
www.jacksonmsc.com The instructions provided here are for maintenance personnel only. Unauthorized persons should not attempt any of the steps contained in these instructions. 1. Using the phillipshead screwdriver, removed the kickpanel. Be careful not to pull out any gauges that may be connected to the panel. Warning: many of the instructions and steps within this document require the use of tools. Only authorized personnel should ever perform any maintenance procedure on the dishmachine! 2.
www.jacksonmsc.com 6. Take the Door Labyrinth Grommet and slide it over the portion of the door gasket that is hanging over the seal lip. AFTER MAINTENANCE ACTIONS Run the machine through several cycles to ensure that the gasket is sealing properly. SPECIAL NOTES Work performed on Jackson dishmachines by unauthorized or unqualified personnel may void the warranty.