R24/R30 Glasswasher Maintenance Instructions Thermostat Replacement 07610-003-12-41 A September 23, 2005
www.jacksonmsc.com Jackson glasswasher machines come equipped with thermostats to ensure proper ware washing results. Occasionally, some of these components may need replacing to maintain optimum performance. Jackson offers all of the repair parts necessary for performing this task. The instructions provided here are for maintenance personnel only. Unauthorized persons should not attempt any of the steps contained in these instructions. STEPS 1. Remove the front door. 2.
www.jacksonmsc.com completely remove the thermostat. 7. Take the new thermostat and place its probe in the new imperial brass fitting provided in your kit. Use the 7/16” combination wrench to tighten it down after getting the fitting hand-tight in the tank. 8. Mount the thermostat to the bracket. 9. Mount the bracket to the tank and tighten down the nuts with the 7/16” nutdriver. 10. Reconnect the wires per the machine schematic on the back of the door. 11. Place the drain stopper back in the wash tank.