Installation Sheet

j a c l o i n d u s t r i e s | 129 Dermody Street Cranford, NJ 07016
p 908.653.4433 f 908.653.1717
CREATED 3.24.20
JACLO.COM
|
PG 2
PARTS NEEDED
1. Sealant Tape
2. Strap Wrench (If Required)
PIPE NIPPLE INSTALLATION
1. Install a 1/2” NPT pipe nipple so that it extends 5/16” to 1/2” beyond the nished wall when fully tightened.
2. Run water through the system to ush out dirt and debris.
3. Wrap sealant tape twice on the threads CLOCKWISE following the direction of the threading tightening the
tape down into the threading.
SUPPLY ELBOW INSTALLATION
1. Install gasket, if applicable, into back of the ecutcheon.
2. Slide the escutcheon onto the supply elbow.
3. Thread the supply elbow onto the 1/2” pipe nipple.
4. Tighten the water supply elbow using a clean strap wrench.
5. Press the escutcheon against the nished wall.
6. If desired, wrap sealant tape twice on the threads of the water supply elbow CLOCKWISE following the
direction of the threading tightening tape down into the threading.
5/16" - 1/2"
1/2" Pipe
Nipple
Finished Wall
Sealant Tape
Water Supply
Elbow
Finished Wall
Sealant Tape
"JACLO INDUSTRIES PROPRIETARY INFORMATION"
Dimensions are for reference only.
Jaclo reserves the right to change specifications without notice.
®
®
5/16" - 1/2"
1/2" Pipe
Nipple
Finished Wall
Sealant Tape
Water Supply
Elbow
Finished Wall
Sealant Tape
"JACLO INDUSTRIES PROPRIETARY INFORMATION"
Dimensions are for reference only.
Jaclo reserves the right to change specifications without notice.
®
®
5/16" - 1/2"
1/2" Pipe
Nipple
Finished Wall
Sealant Tape
Water Supply
Elbow
Finished Wall
Sealant Tape
"JACLO INDUSTRIES PROPRIETARY INFORMATION"
Dimensions are for reference only.
Jaclo reserves the right to change specifications without notice.
®
®
5/16" - 3/8"