Installation Sheet

j a c l o i n d u s t r i e s | 129 Dermody Street Cranford, NJ 07016
p 908.653.4433 | 800.852.3906 f 908.653.1717 | 800.852.4133
CREATED 8.2017
JACLO.COM
|
PG 3
PREPARING FOR INSTALLATION
1. Fasten bottom wall post by putting screw through post and securing it to the bottom wall anchor. (Fig. 1)
2. Remove end caps from wall bar and put in safe/clean location.
3. Slide wall bar through the top of the bottom post going below the top wall anchor. (Fig. 2)
4. Fasten top wall post by putting screw through post and securing it to the top wall anchor. (Fig. 1)
5. Slide wall bar into top post. (Fig. 3)
6. Tighten set screws. (Fig. 4)
7. Replace end caps onto bar. (Fig. 5)
INSTALLING HOSE & HANDSHOWER
1. Screw conical end of hose onto handshower.
2. Insert handshower into the slider.
3. Adjust the height of handshower by simply loosening lever on side of slider, sliding to your desired height and tighten
lever.
POSITIONING OF WALL BAR
1. Determine convenient height for placement of wall bar.
2. Mark holes for proper placement of posts.
3. Drill 1/4” holes in the wall for posts.
4. Insert wall anchors into the wall.
COMPONENT PARTS QTY.
FINISHED WALL
POST
WALL ANCHOR
SCREW
1/4"Ø Hole
"JACLO INDUSTRIES PROPRIETARY INFORMATION"
Dimensions are for reference only.
Jaclo reserves the right to change specifications without notice.
®
®
COMPONENT PARTS QTY.
FINISHED WALL
POST
WALL ANCHOR
SCREW
1/4"Ø Hole
"JACLO INDUSTRIES PROPRIETARY INFORMATION"
Dimensions are for reference only.
Jaclo reserves the right to change specifications without notice.
®
®
COMPONENT PARTS QTY.
FINISHED WALL
POST
WALL ANCHOR
SCREW
1/4"Ø Hole
"JACLO INDUSTRIES PROPRIETARY INFORMATION"
Dimensions are for reference only.
Jaclo reserves the right to change specifications without notice.
®
®
COMPONENT PARTS QTY.
FINISHED WALL
POST
WALL ANCHOR
SCREW
1/4"Ø Hole
"JACLO INDUSTRIES PROPRIETARY INFORMATION"
Dimensions are for reference only.
Jaclo reserves the right to change specifications without notice.
®
®
COMPONENT PARTS QTY.
FINISHED WALL
POST
WALL ANCHOR
SCREW
1/4"Ø Hole
"JACLO INDUSTRIES PROPRIETARY INFORMATION"
Dimensions are for reference only.
Jaclo reserves the right to change specifications without notice.
®
®
Figure 2
Figure 1
Figure 3 Figure 4 Figure 5