User guide

ManualsBrandsJaclo ManualsWater equipmentPressure balance valve with diverter - J-DIV-PBV

INSTALLATION INSTRUCTIONS

jaclo industries 129 Dermody Street Cranford, NJ 07016

p 908.653.4433 | 800.852.3906 f 908.653.1717 | 800.852.4133

JACLO.COM

PRESSURE BALANCE VALVE WITH DIVERTER PG 1

Conﬁdence from start to ﬁnish.

™

PRESSURE BALANCE VALVE WITH DIVERTER

Part Number: J-DIV-PBV

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS PRESSURE BALANCE VALVE WITH DIVERTER Part Number: J-DIV-PBV Confidence from start to finish.™ JACLO.COM PRESSURE BALANCE VALVE WITH DIVERTER PG 1 jaclo industries 129 Dermody Street Cranford, NJ 07016 p 908.653.4433 | 800.852.3906 f 908.653.1717 | 800.852.
PAGE 2
INSTALLATION 1. Turn off water supply. 2. Install valve, making sure valve is in proper position. Make sure “Up” outlet is facing up and hot water is connected on left side and cold is connected on right. Be sure to use a thread sealant or teflon tape on all threaded connections. Up 66” 3. A plastic roughing shield is installed on the valve to Min 1-3/4” Max 2-5/8” insure proper roughing depth and to protect valve Open during construction. Close 4. Connect shower and tub spout piping to valve.
PAGE 3
MAINTENANCE 1. Close both hot and cold stop valves (Fig 4) 2. Remove both the upper (Fig.2, Item 1) and lower cartridges (Fig.2, Item 2). 3. Replace both the upper and lower cartridges in reverse order (Fig 4) be sure the arrow on the cartridge is facing down (Item 3) when installing. 4. Reinstall trim (Item 4) turn on hot and cold stop valves, (Fig 4) and check for leaks. Item # 2 Item # 1 Item # 3 Fig. 2 Fig. 1 Item # 4 STOP VALVE CAP STOP VALVE Fig. 4 Fig. 3 JACLO.
PAGE 4
JACLO PRODUCT CARE In order to maintain the high quality finish of JACLO products, please adhere to the following product care instructions: Cleaning metal parts: For routine cleaning simply use a soft damp cloth and common household soap, then rinse and dry. Proper care of your product is important because most water contains calcium that deposits on surfaces, forming unpleasant spots. This can be avoided by routine cleaning and drying after every use. Use only mild soap based detergents.