SDS

Use water spray to reduce vapors or divert vapor cloud drift. Eliminate all ignition sources (no
smoking, flares, sparks, or flames in immediate area). Keep combustibles (wood, paper, oil, etc.)
away from spilled material. Take precautionary measures against static discharge. Use only
non-sparking tools.
Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is
possible. Use a non-combustible material like vermiculite, sand or earth to soak up the product
and place into a container for later disposal. Following product recovery, flush area with water.
Small Spills: Absorb with earth, sand or other non-combustible material and transfer to containers
for later disposal. Clean surface thoroughly to remove residual contamination.
Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.
Methods and materials for
containment and cleaning up
Avoid discharge into drains, water courses or onto the ground.
Environmental precautions
7. Handling and storage
Do not handle, store or open near an open flame, sources of heat or sources of ignition. Protect
material from direct sunlight. When using do not smoke. Explosion-proof general and local exhaust
ventilation. Take precautionary measures against static discharges. Use non-sparking tools and
explosion-proof equipment. Avoid contact with eyes. Avoid prolonged exposure. Wear appropriate
personal protective equipment. Observe good industrial hygiene practices.
Precautions for safe handling
Keep away from heat, sparks and open flame. Store in a cool, dry place out of direct sunlight.
Store in tightly closed container. Store in a well-ventilated place. Store away from incompatible
materials (see Section 10 of the SDS).
Conditions for safe storage,
including any incompatibilities
8. Exposure controls/personal protection
Occupational exposure limits
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
Form
ValueComponents Type
PEL 240 mg/m3Diacetone alcohol (CAS
123-42-2)
50 ppm
PEL 1900 mg/m3Ethanol (CAS 64-17-5)
1000 ppm
PEL 950 mg/m3isopropyl acetate (CAS
108-21-4)
250 ppm
PEL 980 mg/m3Propan-2-ol (CAS 67-63-0)
400 ppm
PEL 840 mg/m3Propyl acetate (CAS
109-60-4)
200 ppm
PEL 15 mg/m3 Total dust.Titanium dioxide (CAS
13463-67-7)
US. ACGIH Threshold Limit Values
ValueComponents Type
TWA 50 ppmDiacetone alcohol (CAS
123-42-2)
STEL 1000 ppmEthanol (CAS 64-17-5)
STEL 150 ppmisopropyl acetate (CAS
108-21-4)
TWA 100 ppm
STEL 400 ppmPropan-2-ol (CAS 67-63-0)
TWA 200 ppm
STEL 150 ppmPropyl acetate (CAS
109-60-4)
TWA 100 ppm
SDS USPIÑATA ALCOHOL INKS - Standard Colors
956810 Version #: 01 Revision date: - Issue date: 18-February-2022
3 / 12