Installation Guide

Pure Air
®
Bath
Page 14 www.jacuzzi.com Installation and Operation
English
Increase Speed
Operation
All bathtubs manufactured by Jacuzzi Luxury Bath are
designedfor“llanddrain,”whichmeansthebathtub
shouldbedrainedaftereachuseandlledwithfresh
water by the next bather. This is a health precaution,
as these bathtubs are not designed to hold water
continuously like pools or spas.
Two control panel types are available for the Luxury Air
Bath series. Refer to details below:
•
J4 Luxury Electronic Control Panel:
Operational instructions for this panel is listed
below.
•
Optional J5 Luxury LCD Control Panel:
Operation instructions for this panel are outlined in
the supplemental guide provided in your warranty
pack. Refer to this document for complete operation
details (P/N GU47000).
J4 Control Panel
J5 Control Panel
Blower Operation
The last blower setting used is remembered by the
system and will automatically resume upon next
use.
When the blower is turned off, operation does
not immediately cease. There is a delay of 15-20
seconds to allow the blower to cool down. The unit
is shutting down, as indicated by the blinking of
indicator lights.
If in chromatherapy lighting mode (indicator lights
are dim), you will need to press the blower button
once to resume blower operation mode and then a
second time to turn the blower power off.
ON: Press the blower button once to turn the
blower ON.
The indicator light(s) at left will illuminate brightly. The
blower is on a timer and will operate for 20 minutes.
OFF: Press the blower button a second time to turn
the blower OFF.
These lights will
be blinking
Press the (+) button to increase blower speed.
There are 8 blower intensities. Each push and release
of the (+) button will increase blower intensity through 8
incremental steps. The indicator lights display intensity of
blower power.
Alternately, if the (+) button is depressed and held, the
blower intensity will increase through each of the 8 blower
intensities, stopping when the button is released.
Low
1-2
Medium
Low 3-4
High
7-8
Medium
High 5-6
•
1 light on = Low settings 1 and 2
•
2 lights on = Medium low settings 3 and 4
•
3 lights on = Medium high settings 5 and 6
•
4 lights on = High settings 7 and 8
POWER
Main Menu