Use and Care Guide
© 2008 Jacuzzi Luxury Bath • For additional information call Customer Service 800-288-4002 • www.jacuzzi.com
© 2008 Jacuzzi Luxury Bath • For additional information call Customer Service 800-288-4002 • www.jacuzzi.com
© 2008 Jacuzzi Luxury Bath • For additional information call Customer Service 800-288-4002 • www.jacuzzi.com
INSTALLATION NOTES
Refer to installation instructions included with xture before
beginning installation. Please conrm product availability and
specications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
Technical Specifications
DIMENSIONS
72” L x 42” W x 26” H
(1829 mm) L x (1067 mm) W x (660 mm) H
DRAIN/OVERFLOW
A: 17-3/8” (441 mm) B: 11-15/16” (210 mm)
CUTOUT
Template Provided Part Number: BY20000
TOTAL WEIGHT
1323 lb (600 kg) / 63 lb/sq. ft. (308 kg/m
2
)
OPERATING GALLONAGE
87 U.S. Gal. (329 Liters)
Min. 75 U.S. Gal. (284 Liters)
Max. 99 U.S. Gal. (375 Liters)
PRODUCT WEIGHT
240 lb (109 kg)
SKIRT MOUNTING
Not Available
ELECTRICAL SPECIFICATIONS
All require a dedicated GFCI protected separate circuit(s).
Blower: 120VAC, 20AMP, 60 Hz. .
Motor/Pump and RapidHeat™: 240VAC, 20AMP, 60 Hz.
HEATER (STANDARD)
RapidHeat™: P/N BN60000
Product Shown: Allusion
®
7242 Salon
™
Spa
Right Hand (BK10) Shown.
* Measurements inside unit represent cutout in floor
to allow for drain/overflow.
Minimum Service Access dimensions given.
#FR12000 12/08
Allusion
®
7242
SALON™ SPA BATH
BK10 Allusion
®
7242 Salon
™
Spa
Right Hand with Chromatherapy lighting
BT60 Allusion
®
7242 Salon
™
Spa
Right Hand with Illumatherapy™ jet lighting
• Center Drain Location
• Accessories / Hardware:
HTC Jet Trim Kit: #D095
SCH 40 Rotary Drain: #DA34
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
** See Install manual for installations instructions.
C
L
5" x 5"
8-1/2"
Heater
12" H x 18" L
Service Access
Opt. Service
Access
12" H x 18" L
Service Access
(Blower)
(Motor)
END VIEW
H
W
SIDE VIEW
L
4"
2"
ALLUSION SIDE END
(Heater)
MAX 1/2"**
DRAIN/OVERFLOW
A
B