Operating Guide
© 2010 Jacuzzi Luxury Bath • For additional information call Customer Service 800-288-4002 • www.jacuzzi.com/technicalspecs
Refer to installation instructions included with xture before beginning installation. Please conrm product availability and specications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.
TECHNICAL SPECIFICATIONS
FEATURES, UPGRADES & ACCESSORIESKEY DIMENSIONS
INSTALLATION NOTES
Refer to installation instructions included with
xture before beginning installation. Please conrm
product availability and specications before
commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY
ARE SUBJECT TO CHANGE WITHOUT NOTICE.
• Center Drain Location
• Accessories / Hardware:
Trim Kit Rotary: #XX59
Rotary Drain Kit, 26” Cable: #8730
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
Product Shown: Capella 60” Pure Air II™ Bath Right Hand Shown
Model: BE60
* Measurements inside unit represent cutout in oor to allow for
drain/overow. Minimum Service Access dimensions given.
DIMENSIONS
60” L x 60” W x 20-½” H
(1524 mm) L x (1524 mm) W x (521 mm) H
DRAIN/OVERFLOW
A: 18” (457 mm) B: 12-⅛” (308 mm)
CUTOUT
Not Available
TOTAL WEIGHT
1197 lb (543 kg) / 55.8 lb/sq. ft. (272 kg/m2)
OPERATING GALLONAGE
Min. 52 U.S. Gal. (197 Liters)
Max. 84 U.S. Gal. (318 Liters)
PRODUCT WEIGHT
150 lb (80 kg)
SKIRT MOUNTING
Not Available
ELECTRICAL SPECIFICATIONS
Requires a dedicated GFCI protected separate circuit.
Blower: 120 VAC, 15 AMP, 60 Hz.
HEATER
No water heater is available on this unit. Blower has integral air heater.
Capella
®
60 Corner Pure Air II™ Bath
CAP6060 ACR 2XX Capella 60 Corner Pure Air II™ Bath
Right Hand (BE60)
2"
(50,8 mm)
20-3/4"
FRONT VIEW
SIDE VIEW
(Blower)
DRAIN/OVERFLOW
A
B
27"
46-5/8"
27"
60"
43-1/8"
6-3/8"
60"
34-15/16"
14" X 4"*
33-1/2"
Blower
Service
Access
Opt.
Service
Access
90˚
90˚