Spec Sheet
© 2016 Jacuzzi Luxury Bath • For additional information call Customer Service 800-288-4002 • www.jacuzzi.com/technicalspecs
Refer to installation instructions included with xture before beginning installation. Please conrm product availability and specications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.
TECHNICAL SPECIFICATIONS
FEATURES, UPGRADES & ACCESSORIESKEY DIMENSIONS
INSTALLATION NOTES
Refer to installation instructions included with
xture before beginning installation. Please conrm
product availability and specications before
commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY
ARE SUBJECT TO CHANGE WITHOUT NOTICE.
• Right and Left Hand Drain Location
• Accessories / Hardware:
TheraPro™ Jet Rings Kit #GU44
AccuPro™ Jet Rings Kit #GU45 (2 kits required)
• Trim Kit Finishes Available:
(827) – Chrome
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
DIMENSIONS
60” L x 32” W x 21-¼” H
(1524 mm) L x (813 mm) W x (540 mm) H
DRAIN/OVERFLOW
A: 18-½” (470 mm) B: 9” (229 mm)
CUTOUT
58” x 30”
TOTAL WEIGHT
T720, T725: 697 lb (316 kg) / 53 lb/sq. ft. (256 kg/sq. m)
T730: 663 lb (301 kg) / 50 lb/sq. ft. (244 kg/sq. m)
OPERATING GALLONAGE
M
ax. 56 U.S. Gal. (212 Liters)
Min. 42 U.S. Gal. (159 Liters)
PRODUCT WEIGHT
T720, T725: 89 lb (40 kg)
T730: 55 lb (25 kg)
SKIRT MOUNTING
Optional U-Frame P/N F955
ELECTRICAL SPECIFICATIONS
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
Rapid Heat: 120 VAC, 15 AMP, 60 Hz.
HEATER (OPTIONAL) MODELS T720, T725 ONLY
Requires a dedicated GFCI protected separate circuit.
Product Shown: Cetra 532 Whirlpool Bath Left Hand Model:
T720
* Measurements inside unit represent cutout in oor to allow for
drain/overow.
Minimum Service Access dimensions given
Cetra
®
532 Whirlpool Bath
CET6032 WRL 2XX Cetra 532 Whirlpool Bath Right Hand (T725)
CET6032 WLR 2XX Cetra 532 Whirlpool Bath Left Hand (T720)
Cetra
®
532 Bath
CET6032 BUX XXX Cetra 532 Bath (T730)
DRAIN/OVERFLOW
A
B
END VIEW
21-1/4"
SIDE VIEW
60"
2"
(51 mm)
(Blower)
9"
*60"
32"
16"
12" x 4"
Motor
2"
5-3/4"
12" H x 18" L
Service Access
Opt. Service Access
32"
QA05000B