Use and Care Guide

Controlling Whirlpool Action

The whirlpool action in your bath is influenced by three factors –

direction of flow, force of water, and force of air. All baths manufac-

tured by Jacuzzi Whirlpool Bath are equipped with fully adjustable

PowerPro

jets, which are adjustable for all three factors. Some baths

have additional directionally adjustable jets which can be adjusted for

direction and flow of air only.

Direction: To change the direction of the water flow, swivel the jet

nozzle to the desired angle. The jets can be directed individually

toward any location on your body to provide a hydromassage. The

jets can also be adjusted so that they all point in the same direction

(clockwise or counterclockwise) to circulate the water in a circular

motion around the bath, causing a total whirlpool effect.

Water Force: The high volume, fully adjustable jets can be ad-

justed to control the force of the water coming into the bath. For

robust action, increase the force of the flow by rotating the jet handles

to the left (counterclockwise). For a more gentle effect, rotate the

handles to the right (clockwise). Never run the whirlpool system

with all the jets closed.

Force of Air: Two knobs located on the bath serve as controls for

the air induction system. The intensity of the hydromassage whirl-

pool action is determined by the amount of air inducted into the water.

As the amount of air is increased, the hydromassage action increases.

For maximum air induction, rotate the control knobs fully counter-

clockwise to the largest circles. For fewer air bubbles, decrease the

amount of air induction by rotating the control knob clockwise. When

the knobs are turned to the smallest circles, only water is being circu-

lated.

DIRECTIONALLY

ADJUSTABLE

FULLY

ADJUSTABLE

JETS

TURN CLOCKWISE TO

REDUCE AIR FLOW

TURN COUNTER-CLOCKWISE

TO INCREASE AIR FLOW

AIR INDUCTION CONTROLS